Ok,what is it?If it is PDF let them know the exact target dimensions as given by Crt.
60mmx115mm?
We continue here:http://www.diyaudio.com/forums/showthread.php?s=&threadid=147075
hi Ryssen
yes the PCB dimension is like i wrote in post41
about the Eagle Files, not include connection mark ( like input, l-pot, r-pot etc ) those letters only in PDF file.
and my eagle files (layout) is very 'tricky'.
i use 2 layers for bottom layer.
thank's for the effort to make a group buy.
@Surya
dengan senang hati pak.
yes the PCB dimension is like i wrote in post41
about the Eagle Files, not include connection mark ( like input, l-pot, r-pot etc ) those letters only in PDF file.
and my eagle files (layout) is very 'tricky'.
i use 2 layers for bottom layer.
thank's for the effort to make a group buy.
@Surya
dengan senang hati pak.
surya said:Salas, can you send me the EAGLE files ? I want to build one, too.
@ LaOde... thanks for sharing and the PCB works, permisi mau ikutan bikin PCB nya ya bro
You got mail.
So it´s better to use the pdf file then.about the Eagle Files, not include connection mark ( like input, l-pot, r-pot etc ) those letters only in PDF file. and my eagle files (layout) is very 'tricky'. i use 2 layers for bottom layer.
For the group buy go here. Pricing was quoted some time ago for fewer boards and still a slightly different layout. It was very reasonable.
Group Buy here:http://www.diyaudio.com/forums/show...threadid=147075
Group Buy here:http://www.diyaudio.com/forums/show...threadid=147075
Latest boards are shown on the GB thread. http://www.diyaudio.com/forums/showpost.php?p=1908404&postcount=512
Ask
Hi all, new member here.
I want to ask, is it okay to use resistors which is valued +/- 5% on its original value in this project? Because i have some resistors (metal film) with uncommon values, such like:
464 ohms --> substitutes the 470
215 ohms --> substitutes the 220
I want to build this thing too. But since i'm a really little poor guy now, i dont have much budget. I want to use as many components that i already have
Thanks before.
Hi all, new member here.
I want to ask, is it okay to use resistors which is valued +/- 5% on its original value in this project? Because i have some resistors (metal film) with uncommon values, such like:
464 ohms --> substitutes the 470
215 ohms --> substitutes the 220
I want to build this thing too. But since i'm a really little poor guy now, i dont have much budget. I want to use as many components that i already have
Thanks before.
- Home
- Amplifiers
- Pass Labs
- Building a symmetrical PSU B1 buffer