More odds and ends from cleaning house. Circa 2003 or thereabouts, a chip amp kits manufactured by BrianGT. This was assembled into a sharp metal chassis designed by Peter Daniels. I'd like to keep the metal chassis, so I've surgically cut the boards out (ie, snipped the wires connecting them to the volume, source selector and ac mains. What you get is the power supply board and the right and left channel board, one toroidal transformer, and a copper heat sink block that the left and right channel board are mounted onto. Of course the boards have all been assembled and are in working order. Not included are either a volume pot or a source selector. I'd like to get 50 dollars for the lot plus shipping (which is less than the transformer goes for on parts express).
Thanks,
Scott.
Thanks,
Scott.
Sorry for not being more specific. The kit is 3875. The original assembly (though these boards have already been populated) can be found at the following link.
www.briangt.com/nigc_kit-users_guide.pdf
The only other thing I can recall is that at the time I opted to spend a few more dollars on the black gate capacitors that Peter Daniel was providing.
Scott.
www.briangt.com/nigc_kit-users_guide.pdf
The only other thing I can recall is that at the time I opted to spend a few more dollars on the black gate capacitors that Peter Daniel was providing.
Scott.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.