Hello,
I'm installing a Focal 165W3 front/Focal 165W rear/Focal 5WS system in a Porsche 968.
Would somebody be willing to build me two boxes to go behind the front seats for four Focal 5WSes ? Two in each box, one box behind each seat. I'm removing the rear seats but there space is still at a premium.
I'll pay for your materials and your time (minimum materials + $150). I don't have easy access to a wood shop.
If nobody could do that, peraphs somebody could help me design a box and I suppose I could try to find sometime at the local high school's wood shop to cut MDF I'm clueless when it comes to box design.
Thanks,
Aaron
I'm installing a Focal 165W3 front/Focal 165W rear/Focal 5WS system in a Porsche 968.
Would somebody be willing to build me two boxes to go behind the front seats for four Focal 5WSes ? Two in each box, one box behind each seat. I'm removing the rear seats but there space is still at a premium.
I'll pay for your materials and your time (minimum materials + $150). I don't have easy access to a wood shop.
If nobody could do that, peraphs somebody could help me design a box and I suppose I could try to find sometime at the local high school's wood shop to cut MDF I'm clueless when it comes to box design.
Thanks,
Aaron
Im thinking a 1440 cubic inch box split down the middle and braced for two drivers, each in their own side of the cabinet. Baltic birch ply. That gives me 21% more than the .6 cubic feet required. Dimensions that would fit are 16 wide, 6 inch deep, and 15 inches tall. One behind the front and one behind the passenger.
Any opinions?
Any opinions?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.