Amp came in with 2 blown outputs.. I removed all outputs to test them ..
Outputs are out of the amp right now amp is still stuck in protection mode..
Heres what i get on the SG3525
Pin 1:0
Pin 2:5.18
Pin 3:0.02
Pin 4:0.26
Pin 5:2.06
Pin 6:1.42
Pin 7:2.04
Pin 8:4.92
Pin 9:6.10
Pin 10:0
Pin 11:5.86
Pin 12:0
Pin 13:13.88
Pin 14:5.77
Pin 15:13.64
Pin 16:5.18
Any ideas?
Outputs are out of the amp right now amp is still stuck in protection mode..
Heres what i get on the SG3525
Pin 1:0
Pin 2:5.18
Pin 3:0.02
Pin 4:0.26
Pin 5:2.06
Pin 6:1.42
Pin 7:2.04
Pin 8:4.92
Pin 9:6.10
Pin 10:0
Pin 11:5.86
Pin 12:0
Pin 13:13.88
Pin 14:5.77
Pin 15:13.64
Pin 16:5.18
Any ideas?
Im applying both B+ and Remote at the same time..
Sometimes if i do it that way the amp will protect other times it wont..
If i apply the B+ then the remote it will power up..
But if i put more the 2 outputs in it no matter what i do it will go straight into protection even with Q28 lifted
Sometimes if i do it that way the amp will protect other times it wont..
If i apply the B+ then the remote it will power up..
But if i put more the 2 outputs in it no matter what i do it will go straight into protection even with Q28 lifted
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- Boston Acoustics GT-40