bipolar won't have "negative" pin - no front/back
no, in reverse the polar type only block ~1V so the rating of the pair would only be 35 VDC
in series you can add the V rating - if you provide some way to balance the V across the pair
if you do mean bipolar, full thickness oxide grown on both foils then you still need some V balancing technique to use at higher than individual cap rating
no, in reverse the polar type only block ~1V so the rating of the pair would only be 35 VDC
in series you can add the V rating - if you provide some way to balance the V across the pair
if you do mean bipolar, full thickness oxide grown on both foils then you still need some V balancing technique to use at higher than individual cap rating
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.