would be good to have bass/mid/treble control
ups, you are right
I forgot the bass EQ
not sure what will be optimal bass control
not sure what will be optimal bass control
ehh, probably the same again, it would optimally consist of 2 controls, with a mutual centre frequency
and a search on John Bingham tone control gave this result
http://www.diyaudio.com/forums/solid-state/107750-tone-control-one-knob-need-help.html
http://www.diyaudio.com/forums/solid-state/107750-tone-control-one-knob-need-help.html
Get one of these.
Despite being made before I was born, there's still plenty of life in there.
Stereo 150w/ch @4ohm (has the voltage swing to do much more - I measured 100V one-way, bridged into 8ohm).
Also has the facility to run with its own active crossover: there's a dial on the back going from 120Hz to 2kHz, and a balance control for between the two. Each channel also has its own FX loop and line out.
I'm running it stereo into my 4x10" cab wired for 2x4ohm.
Effing loud when needed.
Mine cost me £150. There are other models with other features - I've seen basic 100-150w ones go for <£100 on eBay.
But yeah, tonnes of headroom, lots of facility for shaping your sound, and very cheap for what they are.
Chris
would be good to have bass/mid/treble control
hey, you may be right about it
looking at stereo unit, and hope to change to using 6 mono controls instead
might be nice being able to switch fast between 2 different settings
and even further, the two 'channels' could also be configured slightly different
that would be for the mid only
woofer might have a simple 2hannel parametric
i dont like only ss for bass or guitar amp
probably because you have only tried the cheap ones
solidly built SS power amps are expencive
....but i´d still try it with a tube pre you might prefer it´s tone
its coming its coming
waiting for tubes from siberia
seems like they dont ship from there every day
14 days since payment, and still no sign of being shipped
waiting for tubes from siberia
seems like they dont ship from there every day
and the tubes arrived at my doorstep just now
now you have no more excuses to build the tube preamp
http://www.diyaudio.com/forums/inst...e-hi-z-input-impedance-how-5.html#post3034859
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Live Sound
- Instruments and Amps
- bass speaker help