Hi Peter,
Wow, this is an old thread Anyway, I'm running my 45 in fixed bias: 34mA/300V. The driver is a gyrator in mu-follower output cap coupled to the 45. The current valve I'm using is the 7193. It sounds great.
I'm actually thinking of how the 45 could perform in A2 and whether is worth adding the complexity to the amplifier to get out about 3W from it.
Here are some early thoughts on that:
Driving the 45 DHT in A2 | Bartola Valves
Cheers,
Ale
Wow, this is an old thread Anyway, I'm running my 45 in fixed bias: 34mA/300V. The driver is a gyrator in mu-follower output cap coupled to the 45. The current valve I'm using is the 7193. It sounds great.
I'm actually thinking of how the 45 could perform in A2 and whether is worth adding the complexity to the amplifier to get out about 3W from it.
Here are some early thoughts on that:
Driving the 45 DHT in A2 | Bartola Valves
Cheers,
Ale
Hi Peter,
I'm actually thinking of how the 45 could perform in A2 and whether is worth adding the complexity to the amplifier to get out about 3W from it.
Cheers,
Ale
This is quite a popular amp. Many people can tell you it works fine!
TubelabSE
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.