ARCAM Alpha One

[tubenut]

Do the motor reverse voltage trick or at least apply the rated DC volatage to the motor and see if it turns. This way you at least pin point the spindle motor as a fault or the circuit....

 

[NoBit]

Hello

I bought one "one" as "not working" and 2 condensers seem to be removed

The condenser are C244 and C237, their position is on the right of the flexfoil

An externally hosted image should be here but it was not working when we last tested it.

as indicated by the red arrows

Their value are
C244 => 470NPE
C237 => 1n6PP

I have the service manual (free from Arcam) but the quality is not good so the value ar not correctly readable.

Could someone check these value?

Just another question, from the image the main transformer is placed on the PCB but in mine is placed outside in the chassis... Is this made by arcam or from the previous owner?

Thanks a lot in advance

Eugenio