remember thet your ucd has 20k input impedance. not 100k.
??:
http://www.hypex.nl/docs/UcD400HG manual.pdf
Says 100k, so there should be no problem having 1k on the output of your preamp. That is wel over the rule of thumb ratio of 1:10. So you shouldn't even lose 1dB.
.... rule of thumb ratio of 1:10....
That rule is good enough for lab measurements only. For acceptable sound 1:100 is a bare minimum
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.