For 2 mono blocks - made for Aleph project but can be used for any project i think .
Made completely by 10mm alu plates with heatsinks
The aluplates are cut by a professional and the heatsinks are milled to fit together.
Nice and heavy cabs for DIY
Never used.
Material price > 700US$
Total price 300US$
Made completely by 10mm alu plates with heatsinks
The aluplates are cut by a professional and the heatsinks are milled to fit together.
Nice and heavy cabs for DIY
Never used.
Material price > 700US$
Total price 300US$
Re: ALU cabinets for class A
I have now weighed the alu. Each cabinet is 17kg alu. The "side panels" are the heatsinks - 2 for each side, that is 4 pr. monoblock. The heatsinks are from www.conrad.de and costs approx $40 each. Each heatsink has a C/W at 0.4
Actually I have set the price too low - the price is US$ 350. The price for the heatsinks itself are more than $300 and 22kg of 10mm alu costs nearly $500.
So - the price is US$ 350 for 34 kg of aluminium
I have now weighed the alu. Each cabinet is 17kg alu. The "side panels" are the heatsinks - 2 for each side, that is 4 pr. monoblock. The heatsinks are from www.conrad.de and costs approx $40 each. Each heatsink has a C/W at 0.4
Actually I have set the price too low - the price is US$ 350. The price for the heatsinks itself are more than $300 and 22kg of 10mm alu costs nearly $500.
So - the price is US$ 350 for 34 kg of aluminium
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.