This amp is does some crazy stuff..
If i have the phase switch set at 0 Channel 1 will play but channel 2 is dead..
If i set the phase switch at 180 channel 2 will play but then channel 1 is dead..
I cleaned all switches with Deoxit but the amp still does this..
Any ideas??
If i have the phase switch set at 0 Channel 1 will play but channel 2 is dead..
If i set the phase switch at 180 channel 2 will play but then channel 1 is dead..
I cleaned all switches with Deoxit but the amp still does this..
Any ideas??
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.