This is the second run of AJ-X pcb GB. Wiki info can be found here: Group buy: Peter Daniels AJ-X pcb GroupBuy2 - diyAudio and the working amplifier was presented here: http://www.diyaudio.com/forums/pass-labs/145387-aleph-j-x-amp-project-27.html#post2012118
The AJ-X amp board has 2 scoring lines and is good for two channels of a regular Aleph J circuit or one AJ-X channel
Price for two channels pcb is CAD$20, shipping included, paypal payment to my e-mail address posted here: DIY Chip Amplifier Kits, PCB's, Components and Information.
A matching PS board is also available at CAD$20 and it's good for symmetrical supply in a stereo setup. If you want dual mono, you will need 2 PS boards: http://www.diyaudio.com/forums/audio-sector/149672-universal-power-supply-pcb.html
The boards are already here and ready for immediate shipment.
All boards will be shipped by airmail, with no tracking and no insurance and I cannot assume responsibility for lost packages. If you need insurance, please add $7 to your order
The AJ-X amp board has 2 scoring lines and is good for two channels of a regular Aleph J circuit or one AJ-X channel
Price for two channels pcb is CAD$20, shipping included, paypal payment to my e-mail address posted here: DIY Chip Amplifier Kits, PCB's, Components and Information.
A matching PS board is also available at CAD$20 and it's good for symmetrical supply in a stereo setup. If you want dual mono, you will need 2 PS boards: http://www.diyaudio.com/forums/audio-sector/149672-universal-power-supply-pcb.html
The boards are already here and ready for immediate shipment.
All boards will be shipped by airmail, with no tracking and no insurance and I cannot assume responsibility for lost packages. If you need insurance, please add $7 to your order
Attachments
Last edited:
I'm not able to accept CC directly, but you can do it through paypal. Other methods of payment are Money Order, Western Union, bank transfer ($10 fee applies) or cash (in a letter).
Thanks for the payments; I shipped most of the orders on Friday already, the rest goes tomorrow.
Thanks for the payments; I shipped most of the orders on Friday already, the rest goes tomorrow.
Uh, my dear Peter!
Please help me!
You know, I am a little bit wacky.
I want to built two pieces of J-X stereo amplifier, in different versions.
And even a stereo Aleph J also, just to be me this too.
My question is:
How many boards do I need for this?
How much will it cost me?
Where do I send money? (If it will be me.)
Will as many pieces as I need be from this?
I think, I build the power-supply unit with own resources, exclusively because of the saving.
Although those boards also are very beautiful.
WU I elect it, works to me, finally.
The necessary data I please sends for me, if you have the chance for it.
I hope so, my English was not badder now at the usual one.
Best regards:
Wacky Gyuri
Please help me!
You know, I am a little bit wacky.
I want to built two pieces of J-X stereo amplifier, in different versions.
And even a stereo Aleph J also, just to be me this too.
My question is:
How many boards do I need for this?
How much will it cost me?
Where do I send money? (If it will be me.)
Will as many pieces as I need be from this?
I think, I build the power-supply unit with own resources, exclusively because of the saving.
Although those boards also are very beautiful.
WU I elect it, works to me, finally.
The necessary data I please sends for me, if you have the chance for it.
I hope so, my English was not badder now at the usual one.
Best regards:
Wacky Gyuri
Each AJ-X board allows to build two channels of Aleph J or one channel of bridged Aleph J-X
For two pieces of J-X stereo amplifier you would need 4 boards, for stereo Aleph J, one board. Each board is CAD$20, shipping included.
You will need my address for WU payment and you can contact me through forum mail.
For two pieces of J-X stereo amplifier you would need 4 boards, for stereo Aleph J, one board. Each board is CAD$20, shipping included.
You will need my address for WU payment and you can contact me through forum mail.
Ajx bom
I'm sure this has been answered somewhere before, but reading thru 3 threads hasn't answered my question exactly.
I have the Bill of Materials (BOM) and the schematic for the Aleph-J.
Is this enough info to build an Aleph-J X board? Do the parts IDs in the AJ schematic co-respond to the parts IDs on the AJX boards? Do the daughter boards have their own BOM or parts list?
This is what I have to build a AJX. See attached. Do I need anything else to put together an AJX?
Thanks,
Vince
I'm sure this has been answered somewhere before, but reading thru 3 threads hasn't answered my question exactly.
I have the Bill of Materials (BOM) and the schematic for the Aleph-J.
Is this enough info to build an Aleph-J X board? Do the parts IDs in the AJ schematic co-respond to the parts IDs on the AJX boards? Do the daughter boards have their own BOM or parts list?
This is what I have to build a AJX. See attached. Do I need anything else to put together an AJX?
Thanks,
Vince
Attachments
Please check this link for what's needed to complete AJ-X amp: http://www.diyaudio.com/forums/pass-labs/145387-aleph-j-x-amp-project-27.html#post2012118
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Aleph J-X pcb group buy, 2nd run