Hi DIYers !!!
I have a DVD player with a Digital Output (Coaxial and Optical) and only a stereo Analog Output. I'd like to know if I can build a decoder to obtain a 5.1 Analog Output (on 6 channels)? Does anyone can post plans of this decoder, please? I've already read all posts about the 5.1 subject, but I didn't find any solution to my problem . Sorry if I missed one.
Thanks for answering me. Good luck!
I have a DVD player with a Digital Output (Coaxial and Optical) and only a stereo Analog Output. I'd like to know if I can build a decoder to obtain a 5.1 Analog Output (on 6 channels)? Does anyone can post plans of this decoder, please? I've already read all posts about the 5.1 subject, but I didn't find any solution to my problem . Sorry if I missed one.
Thanks for answering me. Good luck!
Well, you can search www.zoran.com to find about decoder. The problem is: where can you buy the chips? I couldn't have find anywhere the chips, so, good luck !!!
Sorry for my english....
Sorry for my english....
I did it another way...
I went downtown and found one of the stores selling out the obsolete Sony STR-SL5 receiver. It's a slimline design with 5x30W or so with a cooling fan. I got it cheap.
What's so nice with this receiver is that the power amp and power supply is separate from the rest. I intend to rip this board out and replace it with better power supplies and analogue outputs for external power amps.
There I have a complete preamp with DD/DTS and a radio to boot . Including a remote control.
DIY is not always from scratch
I went downtown and found one of the stores selling out the obsolete Sony STR-SL5 receiver. It's a slimline design with 5x30W or so with a cooling fan. I got it cheap.
What's so nice with this receiver is that the power amp and power supply is separate from the rest. I intend to rip this board out and replace it with better power supplies and analogue outputs for external power amps.
There I have a complete preamp with DD/DTS and a radio to boot . Including a remote control.
DIY is not always from scratch
Corsairr and all Decoder DIY player.
I have a board using YSS932 from Yamaha. Which support DD 5.1/ DTS.
I have all control code, and have complete function code in MCU, which depends on your taste.
I have similar post in TRAD post but delete and warning by someone. Should you have any problem, please direct email to:
50140834@alumni.cityu.edu.hk
Regards,
nFORCE
I have a board using YSS932 from Yamaha. Which support DD 5.1/ DTS.
I have all control code, and have complete function code in MCU, which depends on your taste.
I have similar post in TRAD post but delete and warning by someone. Should you have any problem, please direct email to:
50140834@alumni.cityu.edu.hk
Regards,
nFORCE
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Source & Line
- Digital Source
- about Dolby 5.1 decoder