Hi formula 22
I don't made tis amp because I prefer BJTs as output devices, lateral MOSFETs are very difficult to obtain and there are a lot of fakes, vertical MOSFETs like IRFP240/9240 are designed for switching applications.
I'm building my own 25W class A hybrid, see in the forum for schematics.
Best regards
Johann
I don't made tis amp because I prefer BJTs as output devices, lateral MOSFETs are very difficult to obtain and there are a lot of fakes, vertical MOSFETs like IRFP240/9240 are designed for switching applications.
I'm building my own 25W class A hybrid, see in the forum for schematics.
Best regards
Johann
Hi Johann!Hi formula 22
I don't made tis amp because I prefer BJTs as output devices, lateral MOSFETs are very difficult to obtain and there are a lot of fakes, vertical MOSFETs like IRFP240/9240 are designed for switching applications.
I'm building my own 25W class A hybrid, see in the forum for schematics.
Best regards
Johann
Can you recommend a good quality one preamp with tube/valve ECC82 or PCC88 (schematic or project).
Thank you for your cooperation.
Cheers!
Hi Johann!
Can you recommend a good quality one preamp with tube/valve ECC82 or PCC88 (schematic or project).
Thank you for your cooperation.
Cheers!
There is one of my favorites, not bad to begin
SRPP-Vorverstärker
You can see my hybrid here
http://www.diyaudio.com/forums/tubes-valves/207549-25w-class-hybrid-amp.html
Member
Joined 2009
Paid Member
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.