A-75 parts for sale
Front end boards, double sided. Those are tested boards. Trimpots are placed on the other side. If you mount the boards directly on rear panel and drill appropriate holes, you can adjust the amp, without opening it. It is better this way, as the temp doesn't change. USD $50 per board.
Front end boards, double sided. Those are tested boards. Trimpots are placed on the other side. If you mount the boards directly on rear panel and drill appropriate holes, you can adjust the amp, without opening it. It is better this way, as the temp doesn't change. USD $50 per board.
Attachments
I also have regulated PS for front end, delivering +/- 50V DC. Those supplies are based on ML23.5 amp. Schematic: http://www.diyaudio.com/forums/showthread.php?s=&postid=53308#post53308
USD $60 per board.
USD $60 per board.
Attachments
Here are custom built 750VA Plitron toroids. They feature double primaries (115V) and 4 sets of secondaries. Main secondaries deliver 40V DC after rectification and another set of secondaries is for front end PS regulators and deliver about 70V DC after rectification and after reg, you are getting required 50V DC. USD $100 per transformer.
Attachments
I have one set of output devices in TO3 cases. 24 x IRF230 and 24 x IRFP9130. I had to take 9 mosfets out of this set to built my Aleph X, but have more of them in another A-75 amp and can remove them and add here. They were not used much. Since those is not currently avaulable parts, I accept offers.
Attachments
Still have capacitors that can be used in building A-75, or other amps
http://www.diyaudio.com/forums/showthread.php?s=&threadid=10861
http://www.diyaudio.com/forums/showthread.php?s=&threadid=10862
http://www.diyaudio.com/forums/showthread.php?s=&threadid=10861
http://www.diyaudio.com/forums/showthread.php?s=&threadid=10862
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.