In this thread I'm going to post the updates for my 6 channel X250 amplifier.
This will be housed in 2 cases, one for each of the Orion speakers.
The plan is to use 4 toroids of 2KVA at 40 - 0 - 40V for the power stage and 60V for the driver stage.
This is the case planning.
This will be housed in 2 cases, one for each of the Orion speakers.
The plan is to use 4 toroids of 2KVA at 40 - 0 - 40V for the power stage and 60V for the driver stage.
This is the case planning.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.