Hi,
I'm building a Linkwitz Riley active crossover and need to vary the crossover points for the subwoofer and (almost) full range driver I am using. However, as I'm using a mixture of 12db/oct and 24 db/oct in stereo, ideally I need to source 2 x 20K linear 4 gang pot or trimpot.
Can anyone help with a source for 4 gang pots?
Regards,
Dean
I'm building a Linkwitz Riley active crossover and need to vary the crossover points for the subwoofer and (almost) full range driver I am using. However, as I'm using a mixture of 12db/oct and 24 db/oct in stereo, ideally I need to source 2 x 20K linear 4 gang pot or trimpot.
Can anyone help with a source for 4 gang pots?
Regards,
Dean
After much searching, I found a supplier in the UK for 50K quad pots: http://www.falcon-acoustics.co.uk/ & waiting to hear back if they will ship.
I also found out that the Vishay P11/PA11 will also be OK as you can piggeyback these to make up multiple gangs, but have not been able to find a local supplier for this model.
Regards,
Dean
I also found out that the Vishay P11/PA11 will also be OK as you can piggeyback these to make up multiple gangs, but have not been able to find a local supplier for this model.
Regards,
Dean
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.