ryssen said:Nice woodwork. Do you have a schema?
thanks
An externally hosted image should be here but it was not working when we last tested it.
do not use any nail
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Miniwatt said:Great woodwork indeed!! I'm not jealous, not at all, no, really!!
The aluminum goes with the tubes, but I think copper would look better
Congratulations, I worship you
You're right.I'm agree with you.but it is difficulty to get the small copper , so I want to use the the chrome effect aerosol paint . I don't know whether I can buy the gold effect aerosol paint or not.
first schematicsryssen said:Electrical Shcema?Do you have one?
An externally hosted image should be here but it was not working when we last tested it.
finally ,I used this schematics
An externally hosted image should be here but it was not working when we last tested it.
resident said:Nice schem!I'm planning to build sth similar.
What kind of speakers do you have?With this amp you have around 2-3W.Are you using fullrange drivers?
Yes, you're right. I'am using fullrange drivers ,Fostex fe166e .
But I considered the 2a3 SE amp unfit for the fe166e,because the rated input of the fe166e is 22W and the music power is 65w.
BEST
toolbook
But I considered the 2a3 SE amp unfit for the fe166e,because the rated input of the fe166e is 22W and the music power is 65w.
I have a 2a3 SET driving FE166E horns and they sound great!!! I rarely have the volume beyond the mid-position in my 20'x20' room.
UV
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- 2a3SE