hi,
is this amp really working
or just only in paper.......
this is class h I think
http://www.geocities.com/pa_schematics/schematics.html
is this amp really working
or just only in paper.......
this is class h I think
http://www.geocities.com/pa_schematics/schematics.html
I agree with ilimzn:
A simple calculation will show that the maximum possible power delivered to the load is:
V_peak*V_peak / R_load = P_max
==> 115*115 / 4 = 3306.25 watts for peak power in to a 4 ohm load
I have NO idea where the 20,000W claim comes from.
He has what appears to be a nifty rail switching controller, but regardless of whether the amplifier runs in Class AB, B, G, or H, the theoretical absolute maximum power is given by the above formula. The only way to increase the max power is to either have a smaller load (like a 1 ohm speaker, which yields 13225W_peak according to the same formula), or increase the rail voltages.
A simple calculation will show that the maximum possible power delivered to the load is:
V_peak*V_peak / R_load = P_max
==> 115*115 / 4 = 3306.25 watts for peak power in to a 4 ohm load
I have NO idea where the 20,000W claim comes from.
He has what appears to be a nifty rail switching controller, but regardless of whether the amplifier runs in Class AB, B, G, or H, the theoretical absolute maximum power is given by the above formula. The only way to increase the max power is to either have a smaller load (like a 1 ohm speaker, which yields 13225W_peak according to the same formula), or increase the rail voltages.
Well, heres a 3 megawatt video amplifier:
4 Burle 7835s are in the final.
4 Burle 7835s are in the final.
An externally hosted image should be here but it was not working when we last tested it.
only one way to find out, build it...
hey hienrich, can you have a look at www.pinoydvd.com, maybe you would like to post pics of your amps there...
hey hienrich, can you have a look at www.pinoydvd.com, maybe you would like to post pics of your amps there...
hi Tony
kumusta
its been long
better for u
you are in another world. yet proud to be pinoy
yes I hope one of these days I could post some pics of my projects.
tony, actually what am i obsessed for this time is building a
class H or a class G power amp, well class G is bit closer
to me since I have enough inventory of BJT's rather than Hextfet Mosfets in class H amps yet still have the thinking of building one.
hope also that you have some schemes for references since
I still have to learn more about Switching in class G and class H
power amps..
more power,
macweb
kumusta
its been long
better for u
you are in another world. yet proud to be pinoy
yes I hope one of these days I could post some pics of my projects.
tony, actually what am i obsessed for this time is building a
class H or a class G power amp, well class G is bit closer
to me since I have enough inventory of BJT's rather than Hextfet Mosfets in class H amps yet still have the thinking of building one.
hope also that you have some schemes for references since
I still have to learn more about Switching in class G and class H
power amps..
more power,
macweb
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Solid State
- 20k watt amp a document or a working class H