What's wrong with the kiss, boy?

[Zen Mod]

advice - when using any sort of signal iron , do not carve mains xformer place in stone

be prepared to be surprised

in other words - some tale chasing is pretty much inevitable , especially if you like high WAF cases (read - small ones)

 

[noelectrix]

maybe it won´t hurt to put some rusty sheets of metal between turtle and trannie? but you already spoke of "real thick" qualities in this issue.

anyway, i´m prepared and will be open to play with positions

 

[Zen Mod]

......

anyway, i´m prepared and will be open to play with positions

advisable in all times ..... things can get boring

(revisit ootoob from first post of thread )

 

[noelectrix]

 

[Zen Mod]

thing unfolding ...... slowly but surely

 

[WalterW]

Making 10 pieces?

 

[Zen Mod]

actually , that first batch of plastickythingies (ABS) - enough bobbin elements for 15 bobbins , 10 covers

we'll see how many SE or balanced will be needed

no need for more , for starters

pcbs hopefully delivered end of next week ..... then mucho solderiiiiiiiiiiiiiiiiiiiiiiiiing

 

[Dennis Hui]

Fun times ahead ZM.

 

[Zen Mod]

first lazy lousy pics

 

[Zen Mod]

first lazy lousy pics , more

 

[Dennis Hui]

Hey ZM,

I think a Woohoo! is called for.

Cheers,
Dennis

 

[Soundhappy]

Superb work ZM very nice boards

 

[noelectrix]

An externally hosted image should be here but it was not working when we last tested it.

ZM was so friendly to also produce my own little amplifier (unity gain and unity current) on the remaining pcb space.
Totally transparent, no device in the signal path at all
but take care before you order, it´s smd! and unfortunately much costlier that the iron pre

thanks ZM! nicely done, but i´m looking forward to listen to yours also
stefan

 

[Zen Mod]

nota bene that lighter is jumbo size

 

[WalterW]

An externally hosted image should be here but it was not working when we last tested it.

ZM was so friendly to also produce my own little amplifier (unity gain and unity current) on the remaining pcb space.
Totally transparent, no device in the signal path at all
but take care before you order, it´s smd! and unfortunately much costlier that the iron pre

thanks ZM! nicely done, but i´m looking forward to listen to yours also
stefan

Hahah, now I see it on several boards
Very nice work ZM!

 

[Zen Mod]

great avatar !

 

[noelectrix]

but i stole your schematic, i wished it would have been mine

 

[Zen Mod]

yup ....... Holly Grail ..... Wire Without Gain

 

[2 picoDumbs]

What's a decent volume potentiometer that can be purchased from digikey/mouser.

 

[Zen Mod]

find some pro pot , lin , 2x50K

then shunt wiper to gnd

recipe on sound.westhost.com/