How much is shipping for a set of 4 to 81301 USA?
Cheers,
Ryan
Canada Post website is down, I will post a reply tomorrow.
thanks
How much is shipping for a set of 4 to 81301 USA?
Cheers,
Ryan
Hello Ryan, If you mean the 65605 4 x 8”, the very first listing in the thread, I can do it for a flat rate of $175 USD for shipping and parts combined. So to be clear that would be one box of 4 Heatsinks and shipping to you for $175.
I am taking a bit of a hit on the shipping, but I am motivated by the spouse to clear some room in the basement.
I hope you find this a reasonable value.
Anthony
Hello Ryan, If you mean the 65605 4 x 8”, the very first listing in the thread, I can do it for a flat rate of $175 USD for shipping and parts combined. So to be clear that would be one box of 4 Heatsinks and shipping to you for $175.
I am taking a bit of a hit on the shipping, but I am motivated by the spouse to clear some room in the basement.
I hope you find this a reasonable value.
Anthony
Hello Ryan, I was just checking my logs from the old group buys from these things and you were on there, is this correct?
If so I will give you a cut rate price as these were part of the original deal I made with R-Theta. I will let you have a set of 4, for $100 plus $50 shipping, if you want them.
For those of you who asked, I am still unpacking boxes trying to find any suitable parts for the F5. I am sure I got them somewhere.
Anthony
You are correct Sir. We have a deal. Tell me how to send you payment. I may have your paypal in my saved list but in case that has changed, I'll wait for your response.
Thanks very much!
Ryan
Thanks very much!
Ryan
Hello Ryan, I was just checking my logs from the old group buys from these things and you were on there, is this correct?
If so I will give you a cut rate price as these were part of the original deal I made with R-Theta. I will let you have a set of 4, for $100 plus $50 shipping, if you want them.
For those of you who asked, I am still unpacking boxes trying to find any suitable parts for the F5. I am sure I got them somewhere.
Anthony
You are correct Sir. We have a deal. Tell me how to send you payment. I may have your paypal in my saved list but in case that has changed, I'll wait for your response.
Thanks very much!
Ryan
I love how smart devices let you stay in touch anywhere in the world!
If you have the taggs@ address that is still the one to use, if not let me know and I will PM you.
Anthony
How about Monster heat sinks!!
Set of 4 for sale, 12" High x 3" Deep x 12" Wide
Note the IRF240 for scale.
$270
I will let these go for $240 plus shipping, if I can get two buyers I will sell them for $120 plus shipping per pair. One pair should be good for a stereo 50 watt class A no problem.
Anthony
Sold in sets of 4, these Heat Sinks are clear anodized and edge finished. They have never been used and are new in the original prepack. The posted price is for a QTY of 4 Heatsinks, I have 4 sets of 4 available. The Heatsink is 6.96" Wide x 2.79" Deep x 8" High, the base is .54" in thickness. Dimensions are equivalent to a ThermaFlo E3093.
I have them on eBay for $180 for a set of 4, but I am willing to take $130 per set of 4 for DIYAudio Members.
These are large and heavy and can be used in pairs for a small class A or large class AB, or used 4 per channel they could easily handle 100 Watts Class A at Ambient plus 25C. I am running a Stereo MiniA at 20 watts on 4 of these and it runs at ambient after hours of use.
Payments would be accepted via pay Pal, contact me for shipping costs with your address if interested.
Thank You
Anthony
I have dropped the price on eBay to $120, so I will offer these at $110 here, If you were in on one of the group buys for these a few years back, I will give you a special price.
Anthony
Sold in sets of 4, these Heat Sinks are clear anodized and edge finished. They have never been used and are new in the original prepack. The posted price is for a QTY of 4 Heatsinks, I have 4 sets of 4 available. The Heatsink is 6.96" Wide x 2.79" Deep x 8" High, the base is .54" in thickness. Dimensions are equivalent to a ThermaFlo E3093.
I have them on eBay for $180 for a set of 4, but I am willing to take $130 per set of 4 for DIYAudio Members.
These are large and heavy and can be used in pairs for a small class A or large class AB, or used 4 per channel they could easily handle 100 Watts Class A at Ambient plus 25C. I am running a Stereo MiniA at 20 watts on 4 of these and it runs at ambient after hours of use.
Payments would be accepted via pay Pal, contact me for shipping costs with your address if interested.
Thank You
Anthony
I have dropped the price on eBay to $125, so I will offer these at $115. If you were in on one of the group buys for these a few years back, I will give you a special price.
Anthony
I also have these for sale as a set of four. Note the IRF240 on the back of one for scale.
12" Wide x 3" Deep x 6" High
$130
These are sold.
Thank you
Hello Anthony...
paypal... do you want $CAD or $US? I found your symaptico.ca address. I presume that's the one you would like me to use. Sorry for the delay.
Ryan
No worries,
Sympatico account is correct, funds in $US if you please.
Thanks
Thanks, I'll have to pass though. After looking at it a bit more, two is probably going to be a bit undersized, but four is too much for my case idea. Send me a pm with what you have for transformers and devices you have available for the F5.
Well I turned the place upside down, I can not find any 18VAC transformers. I must have sold them before I packed everything up for the move out of Toronto.
Sorry
Paypal sent Anthony. Thanks!
Ryan
Got it Thanks, I will send ship confirmation on Saturday.
Here are a few pics to spur you on. You can see the difference between the 12x12 and the 6.96x8 (side by side).
Also all the boxes of Heat sinks still to liquidate.
Also all the boxes of Heat sinks still to liquidate.
Attachments
Amp I made with 4 65605
I promised a few of you a pic of how 4 would look as one box, here it is.
Now I machined a lip on the top of the heat sinks but the same effect can be achieved by setting the mounting rails down the thickness of the lid, which is what I will do on the next two I build. I use this style for two different amps as you can see by the layout photos. Currently the Mini A runs so cool the aluminum mass can actually chill cold drinks while the amp is running!!
I promised a few of you a pic of how 4 would look as one box, here it is.
Now I machined a lip on the top of the heat sinks but the same effect can be achieved by setting the mounting rails down the thickness of the lid, which is what I will do on the next two I build. I use this style for two different amps as you can see by the layout photos. Currently the Mini A runs so cool the aluminum mass can actually chill cold drinks while the amp is running!!
Attachments
-
IMG_0457.jpg546.9 KB · Views: 66
-
IMG_0456.jpg93.4 KB · Views: 84
-
DSC00360 8x6.jpg96.2 KB · Views: 97
-
DSC00013.JPG609.6 KB · Views: 76
-
DSC00012.JPG651.7 KB · Views: 72
-
Aelph-X A.JPG171.7 KB · Views: 81
-
DSC00329.JPG657.4 KB · Views: 83
-
DSC00328 8x6.jpg97.4 KB · Views: 92
-
DSC00327.JPG668.7 KB · Views: 97
-
DSC00357.JPG675.3 KB · Views: 79
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.