900W H-class PA Amp with Limiter

[mkubawat]

without load you have high voltage on output .
If offset is normal , install some speaker and test or take oscilloscope and see what happen when led is light ( whit 4 or 8 ohm resistor )
Regards !

Thanks
I have no oscilloscope, but i noticed that some delay when switching to high rail, also test with speakers load.how to solve & what is the method for set proper offset.

 

[STAGE4]

bjt power amp class h

2 L/ CLASS-H

 

[desislavov]

with multicet , you must have several mV on output . 0mV is best . But 50mV is not a problem . It`s good to be under 100mV
Whit no signal and input to ground .

Regards !

 

[electra_ina]

Next project: H900 Triple Emitter Follower (TEF): Thanks Mr. Mile...

 

[mkubawat]

with multicet , you must have several mV on output . 0mV is best . But 50mV is not a problem . It`s good to be under 100mV
Whit no signal and input to ground .

Regards !

Thanks desislavov
offset volt is 35mV, it,s look ok but 'rail switching time clipping' problem not solved.please tell me solution,if you know.

 

[azka]

Next project: H900 Triple Emitter Follower (TEF): Thanks Mr. Mile...

wow power that is so great how much it costs for 1 unit of power











Kamus

 

[masood]

hi dear,
i want to make this transformer in e i core can anyone send me winding details.thank yours ever masood my e mil is khan.shahid251@gmail.com

 

[prasanna gunasinhe]

hi chestap,
can we purchase those PCBs from you?

 

[Tung Seng]

Next project: H900 Triple Emitter Follower (TEF): Thanks Mr. Mile...

Dear Mr. Electra,
I saw you have built some nice power amplifier. Your toroidal trafo look so beautiful.. Could I have some info on this toroid. As we know, it's very hard to find high power toroid in our country.

Regards

 

[electra_ina]

Hi..Tung Seng..
This toroid is 3kva CT 55 110 vac, weigh approx 15kgs, diameters 20cm. Yes..very hard to find this toroid. I find this from my friend.

 

[wattaniya]

relay connection

hi Chester
greetings first of all THANK for giving diyers another H class amplifier
SUPERB SOUND QUALITY and the assistance you have provided all the way i am really grateful for schematic and great pcb design real good bass crisp highs and
POWER
1 any diyer making this amp please cut nc no connections on pcb of relay otherwise no problem amp came on first time once again thank you chester looking forward to make more amps of yours
warm regards
andrew lebon

is it correct the relay connection?

 

[Tung Seng]

Hi..Tung Seng..
This toroid is 3kva CT 55 110 vac, weigh approx 15kgs, diameters 20cm. Yes..very hard to find this toroid. I find this from my friend.

Dear Electra,
I wish to buy this good stuff.... Could I have your contact please.....
Regards.

 

[wattaniya]

only need some component to final
(Mobile picture)

hi ravpeet,
did u finished chestas amp.
pls post images.

 

[wattaniya]

hi apex sir,
can i use mur1660ct instead mur1620ct for h900v2?

 

[wattaniya]

hi apex sir,
can u share h900 v2 in pdf both sides.

 

[mkubawat]

Dear Apex
Please help about H900
start clipping when high rail triggers, still same condition without load.
I use LED as a clip indicator instead NSL32
transformer 80-45-0-45-80AC
please tell me reasons & solution.
Attached Thumbnails
900W H-class PA Amp with Limiter-clip1.jpg

 

[sandeep kayarkar]

To Sir Engel Dela Pena,
MANY MANY HAPPY RETURNS OF THE DAY

 

[mj777]

boards

FR4,1.6mm,2 layer

Hello CHESTAP,

Are those boards for sale? they are really nice.

Regards,
mj777

 

[apexaudio]

Dear Apex
Please help about H900
start clipping when high rail triggers, still same condition without load.
I use LED as a clip indicator instead NSL32
transformer 80-45-0-45-80AC
please tell me reasons & solution.
Attached Thumbnails
900W H-class PA Amp with Limiter-clip1.jpg

Do you have two channels (boards)? Post better pictures and some measurements.

 

[wattaniya]

Hi apex sir,
pls can u check this power supply pcb board is correct for h900. i draw from the scematic.
because of the capacitor size, i bought capacitors and not fit to Ur psu baord, so thats why i design this pcb.there are series in caps. 2 into 10000 in series reduced to 5000uf or can u explain.