Thank you...please, concentrate energy by 30 seconds on my
name in August, 24, 02:00 PM Brazilian time, this means 18:00 in UK...check world time in internet.
This gonna help a lot...positive thinking works remotely in mind control... and some thinks changes reality..something connected to Quantum physics.
I have asked 6 people...if two of them concentrate will help a lot...believing or not, do it for me please.
regards,
Carlos
name in August, 24, 02:00 PM Brazilian time, this means 18:00 in UK...check world time in internet.
This gonna help a lot...positive thinking works remotely in mind control... and some thinks changes reality..something connected to Quantum physics.
I have asked 6 people...if two of them concentrate will help a lot...believing or not, do it for me please.
regards,
Carlos
Thank you...please, concentrate energy by 30 seconds on my
name in August, 24, 02:00 PM Brazilian time, this means 18:00 in UK...check world time in internet.
This gonna help a lot...positive thinking works remotely in mind control... and some thinks changes reality..something connected to Quantum physics.
I have asked 6 people...if two of them concentrate will help a lot...believing or not, do it for me please.... you gonna be exausted after that dear Hugh..thank you in advance.
references are in Mind control, subliminary mind control, subconscience recording, the secret, power of the mind and the idea that we are all energy.
Real world experiences happened in the radio transmission called "War of the worlds" and also Joseph Goebels in the III Reich (how to clean conscience and mind programing... Mein Kampf).
You are a friendly soul that vibrates positively Hugh... many times i perceive you sending energies...you just does not know that i could perceive that.
Seems crazy for some folks..i understand..but believe me...we (humans) have never watched an electron...and perceive all we do with them.
Carlos
name in August, 24, 02:00 PM Brazilian time, this means 18:00 in UK...check world time in internet.
This gonna help a lot...positive thinking works remotely in mind control... and some thinks changes reality..something connected to Quantum physics.
I have asked 6 people...if two of them concentrate will help a lot...believing or not, do it for me please.... you gonna be exausted after that dear Hugh..thank you in advance.
references are in Mind control, subliminary mind control, subconscience recording, the secret, power of the mind and the idea that we are all energy.
Real world experiences happened in the radio transmission called "War of the worlds" and also Joseph Goebels in the III Reich (how to clean conscience and mind programing... Mein Kampf).
You are a friendly soul that vibrates positively Hugh... many times i perceive you sending energies...you just does not know that i could perceive that.
Seems crazy for some folks..i understand..but believe me...we (humans) have never watched an electron...and perceive all we do with them.
Carlos
Last edited:
I am sure about that...i know about 6 guaranteed..you are one of them
also Hugh, John Blackburn, Evette, Rudi, Gaetan, ... many others including one moderator that really likes uncle charlie.
About moderators, i would like to inform you all what i could conclude and captured during transmissions.
they are high level of intelligence people.... selected because this characteristics , moral, education and emotional intelligence... they do not protect me alike people think..observe i was in sinbin for 7 days... Salas kicked me out during 7 days because breaking rules...and i know was not easy for him or for them...but they do that to stabilize our forum... i felt, down here, Salas anger...but because had to do it...anger not against me...anger because had to do it.
They do not decide things alone..there's no a single "moderator" deciding things..they decide things in group... when one moderator moves..others have agreed... they protect the forum, the decence, the education..not persons in special.
When my dear Cal Weldon hold the shot gun, with salt pelets to hit someone's back shock absorber...be sure all moderators said in advance " pull the trigger "... this one is alike "energizer"..he moves first!
Other friends will send energies too ( cannot list..there are several others), and i'm sure this helps a lot..has not harm to anyone that decide to spent some friendly energy ....this opens a channel that will allow me to transmit to you too..just that...that big ammount of our brain we do not know what is doing...one thing it does is to behave alike energy transceiver....people call telephathy...and this is almost the same idea.
The ones transmit feel exausted, the one receives feel healthy and some cold touch in the base of the spine..down the body.... it behaves alike battery charger.
Thank you C2sea.... i am receiving often... many thanks.
This is not religion, this is science, studied 90 years long by the humanitty....now a days medicine Psychiatrists does that.
We cannot see the electron..but we know it exists...and much more than that, we make them work for us..we control them....they sound here, in my amplifiers, driving the speakers..no one..have ever...watched an electron.
Be sure, because energies i will receive, positive thinking and a lot of courage, i will be happy and walking inside the hospital, playing with the nurses (there is one there that walks in a lovely way...a professional model too)... will produce pictures about my nurses too.
Ahahahahahah!
Carlos
also Hugh, John Blackburn, Evette, Rudi, Gaetan, ... many others including one moderator that really likes uncle charlie.
About moderators, i would like to inform you all what i could conclude and captured during transmissions.
they are high level of intelligence people.... selected because this characteristics , moral, education and emotional intelligence... they do not protect me alike people think..observe i was in sinbin for 7 days... Salas kicked me out during 7 days because breaking rules...and i know was not easy for him or for them...but they do that to stabilize our forum... i felt, down here, Salas anger...but because had to do it...anger not against me...anger because had to do it.
They do not decide things alone..there's no a single "moderator" deciding things..they decide things in group... when one moderator moves..others have agreed... they protect the forum, the decence, the education..not persons in special.
When my dear Cal Weldon hold the shot gun, with salt pelets to hit someone's back shock absorber...be sure all moderators said in advance " pull the trigger "... this one is alike "energizer"..he moves first!
Other friends will send energies too ( cannot list..there are several others), and i'm sure this helps a lot..has not harm to anyone that decide to spent some friendly energy ....this opens a channel that will allow me to transmit to you too..just that...that big ammount of our brain we do not know what is doing...one thing it does is to behave alike energy transceiver....people call telephathy...and this is almost the same idea.
The ones transmit feel exausted, the one receives feel healthy and some cold touch in the base of the spine..down the body.... it behaves alike battery charger.
Thank you C2sea.... i am receiving often... many thanks.
This is not religion, this is science, studied 90 years long by the humanitty....now a days medicine Psychiatrists does that.
We cannot see the electron..but we know it exists...and much more than that, we make them work for us..we control them....they sound here, in my amplifiers, driving the speakers..no one..have ever...watched an electron.
Be sure, because energies i will receive, positive thinking and a lot of courage, i will be happy and walking inside the hospital, playing with the nurses (there is one there that walks in a lovely way...a professional model too)... will produce pictures about my nurses too.
Ahahahahahah!
Carlos
Attachments
Last edited:
Thanks Wendell....you know, i will develop a new amplifier
Because of Rudi from Germany....he thinks will be a good idea because of Symassym popularity, then i can use the first symassym design published, or the second (the one Michael Bittner loves the most).
Will be an unashamed copy from the Dx Blame ST (already looks alike Blameless) having a marriage with Symasym.... will try to see if this sounds.
This way i will join the one i think it is the best, with another one has enormous popularity, in special, in Germany... the best plus die besten!... alles gut meinen freunds!
Then, offering more power than others, more quality than others, better sonics than others, the possibility to use 4 and 2 ohms loads (difficult loads) and switching features (top secret ones!) i will make something i will give, for a while, the name "Terminator"... to be released by thin uncle charlie during month of November...dead line will be Christmas day.... another gift form your uncle, with all my heart, for the good and nice forum diyers.
Of course, if i do not succeed (I doubt that), will not be published.
Competition!... you should start to feel fear..to shake your bones.... I will be back!
ahahahahahah!.... wait for uncle Charlie research and comparative Rudi are making with the Symassym.. the one Rudi has..do not know if a good sounding one or some tragedy made i have assembled...well..there are several...seems Roender (Physicist, engineer, electronic man and gênius) did.
So, uncle charlie (amateur, curious, not an enginner, a little bit stupid and once sinbined) will make one better.
I promisse you and i guarantee decence, will capture second symasym schematic, will join with Dx Blame ES and ST, will study the topologies merge... will recalculate each stage, will introduce mine own personal touch, will tune it for audio performance and we gonna see...and all that without even read other symasym threads, without watch their amplifiers...without knowing their solutions...doing mine, by myself, alone and researching...producing prototype, board layout, torture test, videos proving and then offering a "ready to go one"
ahahahahahahah!
regards,
Carlos
Because of Rudi from Germany....he thinks will be a good idea because of Symassym popularity, then i can use the first symassym design published, or the second (the one Michael Bittner loves the most).
Will be an unashamed copy from the Dx Blame ST (already looks alike Blameless) having a marriage with Symasym.... will try to see if this sounds.
This way i will join the one i think it is the best, with another one has enormous popularity, in special, in Germany... the best plus die besten!... alles gut meinen freunds!
Then, offering more power than others, more quality than others, better sonics than others, the possibility to use 4 and 2 ohms loads (difficult loads) and switching features (top secret ones!) i will make something i will give, for a while, the name "Terminator"... to be released by thin uncle charlie during month of November...dead line will be Christmas day.... another gift form your uncle, with all my heart, for the good and nice forum diyers.
Of course, if i do not succeed (I doubt that), will not be published.
Competition!... you should start to feel fear..to shake your bones.... I will be back!
ahahahahahah!.... wait for uncle Charlie research and comparative Rudi are making with the Symassym.. the one Rudi has..do not know if a good sounding one or some tragedy made i have assembled...well..there are several...seems Roender (Physicist, engineer, electronic man and gênius) did.
So, uncle charlie (amateur, curious, not an enginner, a little bit stupid and once sinbined) will make one better.
I promisse you and i guarantee decence, will capture second symasym schematic, will join with Dx Blame ES and ST, will study the topologies merge... will recalculate each stage, will introduce mine own personal touch, will tune it for audio performance and we gonna see...and all that without even read other symasym threads, without watch their amplifiers...without knowing their solutions...doing mine, by myself, alone and researching...producing prototype, board layout, torture test, videos proving and then offering a "ready to go one"
ahahahahahahah!
regards,
Carlos
Last edited:
The next will be Dx Symphony.
The best of 2 worlds..the input will use fets, 2SK170 ones.
I will not be influence by other one's ideas than Tommes, the German.
I do not use to visit Symasym threads...i really dislike what people did inside Michael Bittner thread..i found that an invasion and hyjacking..i felt bad...angry...i found that untolerable and disrespectull..others made in a better, they have opened their own threads.
Reason why i do not know, and also i am not interested, what others did...if they invaded, i dennied to be there..not to be acomplice... also their schematics and ideas could no enter my mind as the behavior was not approved by me... and they were banished from my heart...Michael Bittner was a good friend.
The Symasym version, from another German.... tommes.... if he is not from our forum... will be merged with mine.
If mine result alike others...means a coincidence, or obvious solutions, or ideas i had too... does not means copy or cloning of forum folks, wich diagrams i insist to ignore as i have explained... if we match ideas, means they are so good or better than me to achieve good sonics...good for all of us to have several "sonic" guys in the same forum... but i will test, will calculate, will change currents and will listen for sonics...if current is standard of not, or solution is the best technical or not..i will not bother...really do not give a .... for it.
If i discover tommes beeing a forum member and that have published here..then i will go back to Bittner original ideas or will call Michael to help me....i can accept Michael's help as he never imposed himself as a consultant, he never suggest anything we have not asked him.... bittner was a nice man, behaved hundred percent fine in our forum, he always took care of his own business too.... till people took care of his business..invaded the thread, had modified his schematic with him pointing that "this is not a good idea"....me to go there and read them is impossible, would be easir to you to see me kissing a man or a horse than to visit that thread once again.
With all that class he had..dear Bittner....he just left good ideas (explored continuously since he made the first and the great one)..and with a silent good bye, he kicked our ...., i do not know about you..but since that i feel some pain to sit over a wooden chair.
Symphony..... Sym from Symasym.... phon from sound, acoustics, sonics.
regards,
Carlos
The best of 2 worlds..the input will use fets, 2SK170 ones.
I will not be influence by other one's ideas than Tommes, the German.
I do not use to visit Symasym threads...i really dislike what people did inside Michael Bittner thread..i found that an invasion and hyjacking..i felt bad...angry...i found that untolerable and disrespectull..others made in a better, they have opened their own threads.
Reason why i do not know, and also i am not interested, what others did...if they invaded, i dennied to be there..not to be acomplice... also their schematics and ideas could no enter my mind as the behavior was not approved by me... and they were banished from my heart...Michael Bittner was a good friend.
The Symasym version, from another German.... tommes.... if he is not from our forum... will be merged with mine.
If mine result alike others...means a coincidence, or obvious solutions, or ideas i had too... does not means copy or cloning of forum folks, wich diagrams i insist to ignore as i have explained... if we match ideas, means they are so good or better than me to achieve good sonics...good for all of us to have several "sonic" guys in the same forum... but i will test, will calculate, will change currents and will listen for sonics...if current is standard of not, or solution is the best technical or not..i will not bother...really do not give a .... for it.
If i discover tommes beeing a forum member and that have published here..then i will go back to Bittner original ideas or will call Michael to help me....i can accept Michael's help as he never imposed himself as a consultant, he never suggest anything we have not asked him.... bittner was a nice man, behaved hundred percent fine in our forum, he always took care of his own business too.... till people took care of his business..invaded the thread, had modified his schematic with him pointing that "this is not a good idea"....me to go there and read them is impossible, would be easir to you to see me kissing a man or a horse than to visit that thread once again.
With all that class he had..dear Bittner....he just left good ideas (explored continuously since he made the first and the great one)..and with a silent good bye, he kicked our ...., i do not know about you..but since that i feel some pain to sit over a wooden chair.
Symphony..... Sym from Symasym.... phon from sound, acoustics, sonics.
regards,
Carlos
Attachments
Last edited:
By what yourself and others have written DX it seems my amp is running exactly as it should be. I will still endeaver to use a signal generator to test as shown below. I expect everything to be normal after reading these replies.
Pocoyo. I am sure the Elna caps bought from you as used in the power supply will do a superb job and last the life of the amp. They cirtainly make a nice discharge weld mark when accidently touching ground with a rail wire.
Pocoyo. I am sure the Elna caps bought from you as used in the power supply will do a superb job and last the life of the amp. They cirtainly make a nice discharge weld mark when accidently touching ground with a rail wire
.
Dx amplifiers are very relaxing..does not produce stress
people can even take a snap while listening some classical music (ahahahah!)
You can see my dearest nephew Simon (niss_man) taking a nap using the warm and lovely Dx Blame ST as a pillow.
Do the same.. build a Dx Blame ST!.it is for free..sounds great and several forum folks can sign under the advertising as witnesses.
Also, perceive that Dx Builders are always very handsome guys...if your are not..then build .. if you succeed means you are handsome too!...if dear Simon visit Brazil i will have to lock my girls inside home.
Uncle Charlie daugthers are pretty.
It sounds great!
regards,
Carlos
people can even take a snap while listening some classical music (ahahahah!
)You can see my dearest nephew Simon (niss_man) taking a nap using the warm and lovely Dx Blame ST as a pillow.
Do the same.. build a Dx Blame ST!.it is for free..sounds great and several forum folks can sign under the advertising as witnesses.
Also, perceive that Dx Builders are always very handsome guys...if your are not..then build .. if you succeed means you are handsome too!
...if dear Simon visit Brazil i will have to lock my girls inside home.Uncle Charlie daugthers are pretty.
It sounds great!
regards,
Carlos
Attachments
Last edited:
Please dear Coolet.... give me the third dimension i could not find
You sent me the length, the width and not the higth.
I need all dimensions to make my Dx style calculations (not precise but works)
Welcome to the Dx Corporation..send me pictures if possible.
The coil is not critical,... you can use around 22 turns of 1 milimeters enamelled wire coiled over the resistance.....yes..if needed you can use two windings, one above the other.
This picture from Macd (South Africa) shows how he made the coil..he used thicker wire... reason why he had less than 22 turns...no problems about that.
regards,
Carlos
You sent me the length, the width and not the higth.
I need all dimensions to make my Dx style calculations (not precise but works)
Welcome to the Dx Corporation..send me pictures if possible.
The coil is not critical,... you can use around 22 turns of 1 milimeters enamelled wire coiled over the resistance.....yes..if needed you can use two windings, one above the other.
This picture from Macd (South Africa) shows how he made the coil..he used thicker wire... reason why he had less than 22 turns...no problems about that.
regards,
Carlos
Attachments
Last edited:
Your heatsink is wonderfull..able to face 500 watts amplifier
not 500 watts of heat..... would face much more than that..maybe 850 to 900 watts.... excelent one...the best and biggest i had the chance to see.
If i have collected the correct dimensions of course..if i have understood.
This means your heatsink is able to dissipate 4 Dx Blame ST amplifiers, and may accept 5 channels if you use only 8 ohms when using 4 channels.
Heatsink is more than good.... it is excelent...if you assemble a single stereo, then you gonna have your heatsink at 5 degrees above environment temperature..very cool ones.
Ask Rudi if he can manage to order more boards to you...he is in this same thread.
regards,
carlos
not 500 watts of heat..... would face much more than that..maybe 850 to 900 watts.... excelent one...the best and biggest i had the chance to see.
If i have collected the correct dimensions of course..if i have understood.
This means your heatsink is able to dissipate 4 Dx Blame ST amplifiers, and may accept 5 channels if you use only 8 ohms when using 4 channels.
Heatsink is more than good.... it is excelent...if you assemble a single stereo, then you gonna have your heatsink at 5 degrees above environment temperature..very cool ones.
Ask Rudi if he can manage to order more boards to you...he is in this same thread.
regards,
carlos
Last edited:
hi carlos,
many thanks for your assistance. I really enjoy reading your thread. actually I have already a pcb design, need only slight refinement. It can handle all types of emmiter resistor. Big size, small size, standing position and even the TO220 type resistor. I'll post it when I'm done.
Cheers,
Gemma
many thanks for your assistance. I really enjoy reading your thread. actually I have already a pcb design, need only slight refinement. It can handle all types of emmiter resistor. Big size, small size, standing position and even the TO220 type resistor. I'll post it when I'm done.
Cheers,
Gemma
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.