DIY 720p Projector use 10.6inch LCD(1280x768)

[carpow]

Neu, Original, Grade A Panel
Samsung OR TOSHIBA
Grösse: 15.4"
Auflösung: WUXGA
1.920 x 1.200
Grösse: 331.2 x 207.0mm , Pixel Abstand: (mm) 0.173
Farben:262K
Kontrast: 600:1
Helligkeitcd/m2) 175
+
KM9E89BTVL HDMI KONTROLLER
Set: Kontroller Board, Menü Board , Inverter Board , LVDS Kabel
+Fernbedienung
Specification for AD-board:
Signal input: Analog RGB(0.7Vp-p),TTL Composite video signal
(1.0Vp-p +/-5%) S-video(S-Y:0.714Vp-p +/-5%;S-C:0.286Vp-p +/-5%
2-facher Audio Input
(PC Soundkarte& AV Audio input), HDMI YPBPR, SCART
Video system: PAL , NTSC , SECAM; T V Bands: VHF-L:49.75-160.25 MHz
VHF-H:168.25-450.25 MHz
UHF:451.25-863.25 MHz
VESA: DOS, VGA,SVGA,XGA,SXGA, WUXGA
Color: 24bit
Range of H FREQ 30-100KHz
Range of V FREQ 56-75Hz
Signal output:
Double LVDS 10BIT
Output Power for audio: 2x 10W
OSD: AUTO/EXIT,VOL-,VOL+,POWER,CH-,CH+ MENU (A)
OSD MENU:
Kontrast , Hellikkeit, Volumen, Mehrsprachig
TV: Kontrast , Helligkeit , Sättigung , Volumen, Auto-scan ,
Sprachen ,
Netzgerät Input: 12 V(+/-0.6V)
Leistung: Normale Nutzung
Spar Modus Stromverbrauch:
30W (ohne Dauerbelastung)
Abmessungen: 258mm (L) x137mm (W) x29mm (H)

 

[ahakd]

What's included in the 1080p kits? does it come with the lenses, bulbs, etc?

 

[EvilYoda]

Anybody built one of the 1920*1200 kits yet? How difficult/easy would it be to source the extra parts, such as the lenses and whatnot? I can't really tell what you get in the kit and what else is needed.

I'd love to try one of these kits though...

 

[carpow]

15"4 Optic set
1 x Fresnel 500mm
1 x Fresnel 330mm
1 x lamp box
1 x triplet 450mm
1 x 180w/6K lamp
1 x 180w Electronics lamp power
2 x Fans 80MM.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

 

[oaristys]

polarisation

Do you know if the polarisation of the screen is 45 degres ?