diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Vendor's Bazaar (https://www.diyaudio.com/forums/vendor-s-bazaar/)
-   -   Shanti Dual LPS 5V/3A , 5V/1.5A (https://www.diyaudio.com/forums/vendor-s-bazaar/337859-shanti-dual-lps-5v-3a-5v-1-5a.html)

marudo 17th September 2019 08:44 AM

Quote:

Originally Posted by cdsgames (https://www.diyaudio.com/forums/vendor-s-bazaar/337859-shanti-dual-lps-5v-3a-5v-1-5a-post5917124.html#post5917124)


How will USbridgeSig sound with Digione. Sorry I am unable to answer from my test data, I will not give my personal opinion .



Cdsgames,

If not for the sound how was the measurement differ?
Digione sig vs Digione on Usbridge Sig as host.

cdsgames 17th September 2019 11:30 AM

I have not tested that setup and have no plans to do it at this time.



Digione Sig has separated power while Digione has on board DC/DC convertor.
Even though you change the CPU board , noise is made by convertor.

cdsgames 17th September 2019 02:20 PM

1 Attachment(s)
Pic of production Usbridge Sig/Audiophile SBC (rather ultra low noise SBC)

icyjellybean 17th September 2019 03:59 PM

Quote:

Originally Posted by cdsgames (https://www.diyaudio.com/forums/vendor-s-bazaar/337859-shanti-dual-lps-5v-3a-5v-1-5a-post5917124.html#post5917124)
Shanti and Revolution bundle..yes
Isolator is compatible..in fact anything that works on RPI will work on Usbridge
Usbridge + Alu case for USBS+ Digione Sig will be available
If you have purchased a Shanti and want to buy a USbridge , please email is first *with order number) and we will offer you same discount
I recommend earthing USbridge yes and we have added to the manual (place)


How will USbridgeSig sound with Digione. Sorry I am unable to answer from my test data, I will not give my personal opinion .

Awesome, thank you! Should I contact sales@allo.com, or is there another preferred method of communication?

cdsgames 18th September 2019 08:45 AM

Please use the website contact and email with your order number . We will provide you with a cupon for the discount

chipzahoy 19th September 2019 08:26 AM

Quote:

Originally Posted by cdsgames (https://www.diyaudio.com/forums/vendor-s-bazaar/337859-shanti-dual-lps-5v-3a-5v-1-5a-post5918042.html#post5918042)
Please use the website contact and email with your order number . We will provide you with a cupon for the discount

Thank you! Now just waiting for it to go on sale... :p

Shutdown98 19th September 2019 09:35 AM

Quote:

Originally Posted by cdsgames (https://www.diyaudio.com/forums/vendor-s-bazaar/337859-shanti-dual-lps-5v-3a-5v-1-5a-post5918042.html#post5918042)
Please use the website contact and email with your order number . We will provide you with a cupon for the discount

Great!
Already have a reply

weaver4044 19th September 2019 10:14 AM

@cdsgames
Firstly greetings and thank you, have been happily using a full Katana stack and, since launch, Shanti as well.

I think I saw mention of this a while back but can't recall an answer:
As I understand it USBBridge Sig will simply replace the bottom (Pi) layer in my current stack. I would like to be able to use both the USB output of the Bridge (to an external DAC) and also the i2s output to the Katana - not necessarily at the same time, but hopefully with just a change in player software (JRiver and moode) to direct output to the correct device.
Will this be possible/straightforward as it is on a PC for example where you simply select output device as desired or is there something in the way that Katana works with regard to master/slave that would complicate this? Thank you.

cdsgames 19th September 2019 10:17 AM

Usbridge Sig (Ultralow noise SBC) PCB only will be on sale by Friday/Monday the latest


Samples for reviwers will be sent today/tomorrow the latest .



For the version with ALU casing , it will take about 1 week extra. So please hold your purchase if you need alu casing.



PCB price (with SD card and RPI compute module) but no PSU is fixed at 239$ (EU add about 25% for taxes and our shipping cost)


Shipping will start Friday (monday the latest) From India and 3 days latter from EU.


I will post the manual tomorrow (PCB version)




Revolution DAC new pcb was shipped , I will post findings in 1 week (max 10 days)

cdsgames 19th September 2019 12:39 PM

Quote:

Originally Posted by weaver4044 (https://www.diyaudio.com/forums/vendor-s-bazaar/337859-shanti-dual-lps-5v-3a-5v-1-5a-post5919105.html#post5919105)
@cdsgames
Firstly greetings and thank you, have been happily using a full Katana stack and, since launch, Shanti as well.

I think I saw mention of this a while back but can't recall an answer:
As I understand it USBBridge Sig will simply replace the bottom (Pi) layer in my current stack. I would like to be able to use both the USB output of the Bridge (to an external DAC) and also the i2s output to the Katana - not necessarily at the same time, but hopefully with just a change in player software (JRiver and moode) to direct output to the correct device.
Will this be possible/straightforward as it is on a PC for example where you simply select output device as desired or is there something in the way that Katana works with regard to master/slave that would complicate this? Thank you.


Correct output can be either i2s (Katana/Boss and other DACs) or USB. You can simply chose the output in Moode/Pcp/Max2play software


All times are GMT. The time now is 10:00 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio

Wiki