|Vendor's Bazaar Commercial Vendors large & small hawking their wares|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|26th July 2017, 12:39 PM||#1|
Join Date: Jul 2012
FS: „Ultra Low Noise“ Power Supply, LT3045 based PCB’s
I’ve got some PCB’s left to built up an „Ultra Low Noise“ power supply, which I’d like to offer here.
It’s about LT3045 based PCB’s, so you can built up symmetrical (connected by a jumper) or separate power supplies, the PCB itself can be devided in the middle as shown on the pictures, so you’ll get two power supplies for different projects.
Up to 3x LT3045 can be used per side, which gives up to 1,5A per rail.
Output voltage is to be adjusted by using a potentiometer (up to 15V), I recommend to use a heatsing (up to 25x25mm per side).
I use the ps to power opamps in several devices and other designs, which are sensitive to power quality.
The PCB measures 50x68mm, 70um and is kept in beautiful white colour.
The Layout is used from the datasheet, you’ll also find all figures like noise etc there, please take a look to site 20 (parallel devices).
The BOM and the place plan will of course be published to all buyers. Because I did the PCB’s for myself, I don’t have a finished „HowTo“ yet.
If there's more interest, I could finish a small HowTo next days.
If somebody‘s interested, I have some LT3045 left, which can be bought for 5€ each.
International shipping should be about 3,70€ for small amounts, price per PCB is 12€
Contact me for any questions. If you’re intrested, please PM me.
Highlights taken from datasheet:
· Ultralow RMS Noise: 0.8μVRMS (10Hz to 100kHz)
with one regulator, noise is getting lower using multiple regulators
· Parallelable for Lower Noise and Higher Current
· Ultralow Spot Noise: 2nV/√Hz at 10kHz
· Ultrahigh PSRR: 76dB at 1MHz
· Output Current per LT3045: 500mA
· Wide Input Voltage Range: 1.8V to 20V
· Output Voltage Range: 0V to 15V
· Low Dropout Voltage: 260mV
Last edited by Stammheim; 15th August 2017 at 05:09 PM.
|16th August 2017, 08:19 PM||#5|
Join Date: Feb 2016
wrote you an email, I'm in with one board. I had exactly the same idea a few weeks ago, but couldn't find the time to design the boards yet. The only difference I had in mind is to spend a second pot for the current limit function, as well as using Vishay precision pot:
I have already 7 segment panel volt and current meter on my desk for that purpose:
An externally hosted image should be here but it is no longer accessible. Please upload images instead of linking to them to prevent this.
Now you have been fastern than me and I can save that time and spent it on another project.
|7th October 2017, 05:33 PM||#9|
Join Date: Jul 2012
HowTo and BOM are finished, so it should be easy for everyone to understand!
Because I was asked to finish also boards for less experienced users, I also offered boards with fully published LT3045 (6 pcs per board) for 82€. That's a few bucks more, but soldering the little guys isn't easy, on the other side the function is checked, one only needs to populate other parts, 0805 and bigger.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|low noise Pre-Amp / DAC power supply MJE15034 TL072 Regulator based on STUDER 900||yoshisoakland||Power Supplies||29||5th December 2018 06:03 PM|
|FS: TPS7A4700 low noise power supply SALE!!!!!||mravlca||Vendor's Bazaar||8||18th March 2017 09:46 PM|
|Ultra Low Noise and Low Power Consumption OCXO||ULNOCXO||Vendor's Bazaar||21||6th July 2014 10:39 PM|
|Ultra Low Noise - Ultra Low Impedance - Ultra big Problems!||Stefan0815||Analog Line Level||2||14th January 2014 07:01 AM|
|Scavenging ultra low noise power supply||jackinnj||Power Supplies||3||7th September 2008 05:32 PM|
|New To Site?||Need Help?|