Reference DAC Module - Discrete R-2R Sign Magnitude 24 bit 384 Khz - Page 874

manniraj · 13th February 2019, 06:36 AM

I am using the revision 2 board without any mods along with the Normunds input selector board. The input board is powered separately via the Salas Ref-D board. Now since 4 years or so I was powering the dac with Salas 1.1 and now recently upgraded and built the Salas Ultra BiB 1.3 PSU boards. What I have seen is that the positive board draws around +500mV for the PSU board to be stable against the stated 180mV from the Soekris manual. This doesn't seem to be right for me that a DAC is pulling more than 500mV. Is it normal or do I see an issue as with more than 500mV the psu is stable with +/-12Vdc and I do not want to give any input signals till I am sure that all is right?

thanks

Slazi · 13th February 2019, 12:10 PM

Quote:

Originally Posted by ynmichael

....

Please do not continue.

maikel76 · 13th February 2019, 01:08 PM

Quote:

Originally Posted by Slazi

Please do not continue.

+1
You (ynmichael) accused Søren of things he didn’t do and frankly it’s not appropriate

boxerfan88 · 13th February 2019, 01:36 PM

Quote:

Originally Posted by derekr

Am I the only one that finds paragraph 7 of post 8725 above not only disrespectful but a thinly-veiled personal attack? Uncalled for in a social forum.

+1000000

daanve · 13th February 2019, 02:22 PM

Quote:

Originally Posted by derekr

Am I the only one that finds paragraph 7 of post 8725 above not only disrespectful but a thinly-veiled personal attack? Uncalled for in a social forum.

Guys stop whining and try to stay on topic!
When you think there is disrespectful behavior and/or personal attacks, simply REPORT.
That's where we have moderation for.

Moderation Team · 13th February 2019, 05:28 PM

Thread closed for maintenance.

13th February 2019, 05:28 PM	#8736
Moderation Team diyAudio Moderator Join Date: May 2012	Thread closed for maintenance. __________________ Please note: PM's sent to this account will not be answered.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
e18 DAC - 8 channels at 32bit /384 kHz	exa065	exaDevices	30	29th June 2012 06:11 PM
384 Khz DAC?	SunRa	Digital Source	8	2nd October 2009 12:14 AM
24 bit/192 kHz via USB?	gentlevoice	Everything Else	3	22nd December 2008 07:24 AM
sign magnitude DAC	Bernhard	Digital Source	0	30th January 2007 02:40 PM
24 bit / 192 kHz Tube DAC questions	Overlord	Digital Source	4	29th April 2003 06:14 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th February 2019, 06:36 AM	#8731
manniraj diyAudio Member Join Date: Nov 2012	I am using the revision 2 board without any mods along with the Normunds input selector board. The input board is powered separately via the Salas Ref-D board. Now since 4 years or so I was powering the dac with Salas 1.1 and now recently upgraded and built the Salas Ultra BiB 1.3 PSU boards. What I have seen is that the positive board draws around +500mV for the PSU board to be stable against the stated 180mV from the Soekris manual. This doesn't seem to be right for me that a DAC is pulling more than 500mV. Is it normal or do I see an issue as with more than 500mV the psu is stable with +/-12Vdc and I do not want to give any input signals till I am sure that all is right? thanks