Hello,
I have got a problem with my OTTO2. the setup = toslink> S/PDIF Transceiver Module > metronome >B2 DAC. Without the Otto the sound is good but with it there is almost no music and a lot of crackling sound. The I2s lines are about 8cm totally, coax or single wire made no difference. Especially the BCK wire is very sensible. When i connect that wire directly from Tranceiver module to the metronome all static is gone. That wire is 7cm in length. Hopefully it's not the lenght of the i2s wires....
I have got a problem with my OTTO2. the setup = toslink> S/PDIF Transceiver Module > metronome >B2 DAC. Without the Otto the sound is good but with it there is almost no music and a lot of crackling sound. The I2s lines are about 8cm totally, coax or single wire made no difference. Especially the BCK wire is very sensible. When i connect that wire directly from Tranceiver module to the metronome all static is gone. That wire is 7cm in length. Hopefully it's not the lenght of the i2s wires....
Attachments
Correction : There is still distortion without the OTTO. It must be the wirelength between the Transceiver module & the Metronome. 4cm wire is still too long, i can't use this setup
Answered here:
cracling sound with OTTO2
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.