I2S-S/PDIF 2:1 Mux Receiver

[merlin el mago]

I'm looking for an input receiver one I2S + one or two S/PDIF output one I2S to BII, I think you don't have this product & it will be interesting to connect the future new module USB high rez input receiver with other transports like Blue-Ray, CD, DVD-A, SACD, I think can be a nice product to offer for Diyers community.

 

[LeonvB]

Look for the MRB1 in the future, or for an old OTTO.

 

[merlin el mago]

Otto is for 2 I2S inputs & I need 1 I2S & 1 S/PDIF inputs?

 

[analog_sa]

As there are many SPDIF receiver boards you just need a MUX. Cannot see combining this with a receiver on the same board being a good idea.

 

[merlin el mago]

I don't want to convert I2S in S/PDIF & after come back to convert S/PDIF in I2S when I use the HiFace.

 

[LeonvB]

The MRB1 is a simple relay module. Since the I2S & SPDIF (provided it's TTL) use the same settings on the BII module you could simply select the input you like. And let the BII handle the correct signal conversion.

 

[lesuisse]

PCM9211 from TI is the IC you are looking for but requires SW. Good luck

 

[merlin el mago]

@LeonvB
@lesuisse
Thank you for the info.