• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Quick identification question

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
S

stueyp

Member
Joined 2006
Hi there everybody....having rid myself of some dubious Chinese equipment, I have acquired from a guy down my road, a pair of monoblocks apparently based around a Lumley design. See the pics:

http://www.fossilfarm.co.uk/stuebay/valves.jpg
http://www.fossilfarm.co.uk/stuebay/valves2.jpg
http://www.fossilfarm.co.uk/stuebay/valves3.jpg

I know I shouldnt have it all stacked like that but im a bit short on space at the mo. But could anyone tell me what the valves are? The power valves are about 50% bigger than EL34's and apparently the amps give 70W. The output transformers are fairly hefty. Apologies for the bad interior pics. Any ideas what the design may be?

Thanks in advance,
Stuart.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom