• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

6c33 Set

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
Alastair E

Alastair E

Member
Joined 2004
doctordiesel.co.uk
Hopefully this will work, Ive attached the CCT diagram of my little project

See what you guys think!--(Dont be too hard on me, its my first actual build of a valve amp!)

My choice of valves was based on what I had around--My original plan was to make an OTL based on the Allan Kimmel Monoblock, but subbing the EL509's for 6C33, with a few mods
Thought Id better do a fairly straightforward SET before building that one!

Ive built this on breadboard and considering I havent got a proper O/P Tx, sounds quite good.Hope to wind the TX next week.
 

Attachments

  • 6c33 set.jpg
    6c33 set.jpg
    43.3 KB · Views: 360
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom