Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Using tube rectifier to as slow start in HT over 500V
Using tube rectifier to as slow start in HT over 500V
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 19th October 2020, 09:52 AM   #21
januaryabc is offline januaryabc
diyAudio Member
 
Join Date: Apr 2020
Quote:
Originally Posted by trobbins View Post
It seems that the simple addition of a protection ss diode on the 6SN7 grid to cathode, and on the 300B would suppress any concern about high positive bias levels at power turn-on due to sequencing of the different B+ rails, and conduction delay differences of the 3 valves. With that setup, I'd think the worst case would be a relatively slow 6SN7 turn on, such that the 300B bias sat around 0V for some seconds, although increased 300B conduction would be alleviated by a rising cathode voltage so perhaps not too significant.

The 300B has > 800V across it during normal operation due to signal swing. I don't see that as a stress per se.

Any other stresses?
I not sure the actual position of the “protection ss diode” you mentioned and the way it works. Do you mind explaining further on that?
  Reply With Quote
Old 19th October 2020, 10:16 AM   #22
trobbins is offline trobbins  Australia
diyAudio Member
 
trobbins's Avatar
 
Join Date: Feb 2009
Location: Melbourne, Oz
Connect an ss diode such as a UF4007 from input grid to cathode. The ss diode is oriented to conduct if grid goes positive with respect to cathode, and so clamps that voltage difference between the terminals to circa 0.7V during initial power up if the B+ rails rise before the amp valves conduct. The ss diode is reverse biased for normal idle and signal swings (ie. it is fine for class A and AB1 operation, but would not be appropriate for AB2 operation). The ss diode junction capacitance varies with reverse voltage but is nominally low enough not to noticeably influence the high frequency corner of the stage (ie. driving resistance from previous stage and capacitance of the valve including miller effects).
  Reply With Quote
Old 19th October 2020, 03:13 PM   #23
kodabmx is offline kodabmx  Canada
Spreading triode love.
diyAudio Member
 
kodabmx's Avatar
 
Join Date: Oct 2011
Location: Toronto
Using tube rectifier to as slow start in HT over 500V
A picture is worth a thousand words :P Like D11 in this photo.
Click the image to open in full size.
__________________
If you can't learn to do something well, learn how to enjoy doing it poorly.
  Reply With Quote
Old 19th October 2020, 04:21 PM   #24
Ketje is offline Ketje  Belgium
diyAudio Member
 
Ketje's Avatar
 
Join Date: Dec 2012
Location: Flanders
That diode is only usefull if the HT is applied with a cold tube.
Without it the full HT is between grid and cathode.For many tubes Vgk is max 50V.
Mona
  Reply to this post

Reply


Using tube rectifier to as slow start in HT over 500VHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pioneer SA-508 Very slow start 6V6dude Solid State 20 19th May 2019 12:49 PM
12x BYT79-500 14A 500V Soft recovery rectifier diodes cathodes Swap Meet 2 7th December 2016 11:09 AM
Damper diode slow start rkoonce Tubes / Valves 14 4th April 2016 09:02 PM
Slow Start for Bride of Zen Halauhula Pass Labs 8 14th November 2014 11:06 AM
Rectifier with slow start up? Burnedfingers Tubes / Valves 19 14th August 2008 10:53 AM


New To Site? Need Help?

All times are GMT. The time now is 11:31 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio
Wiki