Ordering from Justradios.com - Page 19

Fjellreven · 6th July 2020, 02:06 PM

Yeah but is my soldering good enough

YouTube

Go into the video at 5 minutes 25 seconds

Is my soldering better then his, i want my solder joints to last as Long as possible.

duncan2 · 6th July 2020, 02:13 PM

Sorry Fjellreven cant access YouTube I have it blocked due to tracking.

I have repaired radios from the 1920,s and have never needed to go round every soldered connection reflowing them just the ones that looked bad.

Because of the heat generated in power amps this is more of an issue but not in tube radios .

Fjellreven · 6th July 2020, 04:13 PM

Well i am very thankfull Duncan and all the other for you're help and here is little tip maybe you already know this but before you buy a radio or a speaker where you can't easily remove the protection try the light trick, it can't tell you if its rubbing or if the voice coil is shorted but it can tell you if there are major DAMAGE to the cone.

Fjellreven · 6th July 2020, 04:16 PM

Opps the picture wont show but here they are.

Fjellreven · 7th July 2020, 12:23 PM

Well ops something happened i managed to burn a pad. is this an acceptable solution? I am aware i used to much heat im turning it down.

Fjellreven · 7th July 2020, 12:24 PM

Yeah im aware that doesnt look that great but im not used to soldering in such a cramped Space.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Justradios - Recent email problem	VictoriaGuy	Parts	0	26th February 2019 01:35 AM
Anyone ordering from THEL?	Nisbeth	Parts	0	6th April 2007 10:39 PM
Ordering a Charlize?	onehotchili	Class D	2	26th May 2006 07:58 PM

New To Site?	Need Help?
Register to Participate Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

6th July 2020, 02:06 PM	#181
Fjellreven diyAudio Member Join Date: Mar 2020	Yeah but is my soldering good enough YouTube Go into the video at 5 minutes 25 seconds Is my soldering better then his, i want my solder joints to last as Long as possible.

6th July 2020, 02:13 PM	#182
duncan2 diyAudio Member Join Date: Mar 2013 Location: Scotland.	Sorry Fjellreven cant access YouTube I have it blocked due to tracking. I have repaired radios from the 1920,s and have never needed to go round every soldered connection reflowing them just the ones that looked bad. Because of the heat generated in power amps this is more of an issue but not in tube radios .

7th July 2020, 12:24 PM	#186
Fjellreven diyAudio Member Join Date: Mar 2020	Yeah im aware that doesnt look that great but im not used to soldering in such a cramped Space.