Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

The classis Push pull vs Single ended question
The classis Push pull vs Single ended question
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 27th March 2020, 01:17 PM   #31
Bill Coltrane is offline Bill Coltrane  Netherlands
diyAudio Member
Join Date: Oct 2018
Originally Posted by 6A3sUMMER View Post
So try this:
Build a push pull amplifier (*):
Set the phase invertor to have a slightly unbalanced amplitude of the in-phase versus the out-of-phase signals.
Now, you have dominant 2nd harmonic distortion; and you have relatively linear damping of the woofer over the positive and negative excursions.
And you have the better output transformers that are capable of good bass.
This is what I said, in other words.
Subjective measurements with the proper protocol is the only thing that matters.
  Reply With Quote


The classis Push pull vs Single ended questionHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DoZ Single ended or push pull ? vizion Solid State 3 4th October 2019 12:15 AM
GU-46 push-pull & single-ended amplifiers thomasweissbach Tubes / Valves 147 7th July 2019 02:59 PM
Single-ended OR push-pull? kacernator Tubes / Valves 58 11th October 2017 05:40 PM
ino, a possible single-ended push pull amplifier st r Pass Labs 9 6th September 2015 07:38 AM
Single ended amp from class A push-pull Wavebourn Tubes / Valves 2 12th October 2007 09:14 PM

New To Site? Need Help?

All times are GMT. The time now is 05:51 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio