Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

riaa amplifier
riaa amplifier
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old Today, 05:48 AM   #31
6A3sUMMER is offline 6A3sUMMER  United States
diyAudio Member
Join Date: Jun 2016
Many readers know about these subjects.
(But many readers do not).

Phase is an easy test if you have a sine wave oscillator and an XY scope.
A little time, a little patience, a little work, and you get the results.

But just be sure the phase of your reverse RIAA network is correct, including when it drives the preamp input stage, including the grid resistor, and especially the Miller Effect input capacitance of the input stage (and the varying gain of the input stage plate if it is driving anything other than a constant impedance across the frequency band). Any change of the plate load versus frequency will cause the gain to change, and consequently the
Miller Effect capacitance reflected back to the input will not be a constant either.

And remember, different cartridges have different DCR, different inductance, and the tonearm cable and coax from there to the preamp have many different possible capacitances.

Does anybody remember the Saddle-Back frequency response curve of the beloved Shure V15 cartridge?
Track-ability, Yes.
Flat frequency response, No.

Onion Layers indeed.

Last edited by 6A3sUMMER; Today at 05:55 AM.
  Reply With Quote


riaa amplifierHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Solid State Phono Pre-Amplifier with RIAA LCR Network - Overview wanted tiefbassuebertr Analogue Source 2 17th February 2018 08:47 PM
What type of RIAA for Denon Dl103 cart to Gainclone LM3875 amplifier tralalalala Analogue Source 9 3rd January 2016 03:34 PM
DIY turnable amplifier aka RIAA - newbie questions! hansibull Analog Line Level 22 23rd May 2014 08:53 PM
Need help on RIAA Andersen Tubes / Valves 35 28th April 2013 06:25 PM
Riaa........... Chris Everything Else 15 12th September 2001 03:31 PM

New To Site? Need Help?

All times are GMT. The time now is 02:23 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio