• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Dynaco MK 4 "project"

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I'm trying to clean out my stereo component stash. I don't know what I was thinking but in a weak moment on Ebay I purchased a pair of Dyna Mk 4 power amps that someone was apparently trying to convert to something like the Paoli MK 3 amps but with an external power supply. There are some good parts still, but I can't imaging me doing anything with them. Suggestions?
Dyna MK 4 photos - Google Drive
 
If you want to keep them, and the chassis are not butchered, rebuild them as Mark IV's, If the chassis are bad, go the Stereo 70 route,with a better driver board and sell any "good" Mark IV parts to recover some cost.
It looks like the power transformer would fit the Stereo 70 chassis
Otherwise sell them as is, for parts
I might be interested depending on price.
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.