I have recently been given four Luxman MB-3045 monoblocks (one has a tranny missing) and 13 of the VERY RARE 8045G tubes.
I have a Hickok TV-7D/U tester but have no idea how to test these tubes on it. Any help would be most appreciated!
Ultimately, I plan to sell the amps and tubes but I'd like to know how much life if left in the tubes before I list them.
Thank you!
I have a Hickok TV-7D/U tester but have no idea how to test these tubes on it. Any help would be most appreciated!
Ultimately, I plan to sell the amps and tubes but I'd like to know how much life if left in the tubes before I list them.
Thank you!
I have fitted KT88s to these in the past, with good results. Pin for pin is the same except connect pin 4 to pin 3 for triode mode or pin 4 to the HT through a 220R 5W resistor for Pentode/Beam Tetrode (depending on the maker of the KT88/90/120 as some are pentode and some are beam tetrode) mode.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.