• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

High gain Tube amp problems

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
F

firebird josh

Member
Joined 2003
I am trying to get a compressed high gain tone (think Mesa) from my Mig 100. I modded the schematic to the same specs as a JCM800. I also changed the CF to another gain stage and it still is weak. It sounds buzzy, not tight. Maybe I should mod the power amp as well? Can anyone post some schematics of amps that have been built and are known to sound tight, and only uses two 12AX7's? Thanks alot.

(Also, I apologize if this comes up often or is too vague, I am new here).
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom