Hi
I want to replace the capacitors in this tube amp. (Schematic here). Specifically the caps that are installed right after the rectifier. I am wondering if the Panasonic EE series would be suitable for the application. I've read that you need high ripple caps in this location, and these do look suitable to me:
Datasheet Panasonic EE radial
I am thinking about replacing the four caps (100uF/100uF/75uF/25uF) with four 47uF/450V caps instead, since other values have been hard to find. Is this a good idea?
Any help greatly appreciated.
I want to replace the capacitors in this tube amp. (Schematic here). Specifically the caps that are installed right after the rectifier. I am wondering if the Panasonic EE series would be suitable for the application. I've read that you need high ripple caps in this location, and these do look suitable to me:
Datasheet Panasonic EE radial
I am thinking about replacing the four caps (100uF/100uF/75uF/25uF) with four 47uF/450V caps instead, since other values have been hard to find. Is this a good idea?
Any help greatly appreciated.
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.