Rogers Cadet III Integrated Amp Capacitor Values help

[timmo1928]

I'm currently recapping the amp which had been partially restored before. There are three blue electrolytic capacitors that I can't find the values for as the writing has worn off and I can't find them on the schematics for the separate pre/power version. They look to be small uf and voltage values and might have been replaced before.

Does anybody know what the values are for

The capacitor that is on the balance control

2 identical small capacitors that are just behind the push selector switches

If anybody has replaced the 6.8pf capacitors between the pins on the 2 output valves what type and voltage value did you use.

Thanks in advance to anybody who can help

 

[Alain Dupont]

timmo1928,

you should have a look at :

Rogers Cadet III stereo integrated amplifier

Alain.

 

[timmo1928]

Thanks for your reply but the schematic and components list are actually for the seperate pre and power amp version and don't show the capacitors I'm trying to find the values for.

 

[timmo1928]

Just in case anyboy needs theis information. I've got hold of another Cadet amp and the values of the capacitors in it are

The capacitor that is on the balance control - 125uf 4 volt

The 2 identical small capacitors that are just behind the push selector switches - 50uf 3 volt

 

[timmo1928]

I mistyped t hev voltage of the 2 identical small capacitors that are just behind the push selector switches - which are 50uf 6.4 volt