• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

noisy rectifier tube

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
hello there
i have finally got my SE tube amp working.

picture below

however i have noticed that the rectifier tune is making an audible noise, it doesn't sound like a hum more of a sort of creaky squeal. its not that loud and doesn't seem to affect the sound from the speakers.
i noticed that if i clamp my fingers round the tube (when its not too hot off course) the sound is a bit quieter. is this normal

is there potentially something wrong here or is this normal

cheers
 

Attachments

  • p1010016b.jpg
    p1010016b.jpg
    29.9 KB · Views: 231
Hi,

does this noise stop once the rectifier has warmed up?

If so, it just the current rushing into the rectifier and producing a squealing or banging and clanging noise.
I've had the same "problem" with an EZ81 on one of my headphone amps (and I asked about the noise here, too...).

I my case I just added a bit of resistance (220 ohms) before the rectifier tube, and now I have silence.


my 2 eurocents...;)
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.