• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

input

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
rayma

rayma

Moderator
Joined 2011
Either located internally or externally, you'd need a three position stereo switch, and the RCA sockets.
Isolate the RCA grounds from the chassis, and connect them to the audio ground.
The drawing shows one channel, two are needed for stereo. You can omit the volume control if it is not needed.

You can buy boxes like this already made up, if that is preferable. An example:
RCA stereo input audio signal source Switch Switcher Splitter selector box 3 IN | eBay
 

Attachments

  • preamp-2 (1).png
    preamp-2 (1).png
    6 KB · Views: 120
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom