Thanks George...
Is there any problem with using this resistor for R7 from mouser instead of the panasonic one from digikey.
https://www.mouser.com/Search/Produ...virtualkey66000000virtualkey660-MO2LT631R104J
It's bigger, but it looks like the lead spacing will just fit. I just don't want to use a part that will degrade the sound.
Is there any problem with using this resistor for R7 from mouser instead of the panasonic one from digikey.
https://www.mouser.com/Search/Produ...virtualkey66000000virtualkey660-MO2LT631R104J
It's bigger, but it looks like the lead spacing will just fit. I just don't want to use a part that will degrade the sound.
I was in the same situation over the weekend, and I decided to order p/n 747-DSEI12-10A. This has nearly the same specs as the 747-DSEI12-12A, the only differences being:
10A 12A
------ ------
Vfwd 2.1V 2.2V
Pdsp 75W 78W
Vrev 1000V 1200V
Are these specs not acceptable? I noticed that Mr. Tubelab mentioned a reverse voltage of 1200V...
Should I order the DSEI20-12A instead?
Thanks,
Eddie
10A 12A
------ ------
Vfwd 2.1V 2.2V
Pdsp 75W 78W
Vrev 1000V 1200V
Are these specs not acceptable? I noticed that Mr. Tubelab mentioned a reverse voltage of 1200V...
Should I order the DSEI20-12A instead?
Thanks,
Eddie
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.