Go Back   Home > Forums > > >

Tubelab Discussion and support of Tubelab products, prototypes and experiments

Reply
 
Thread Tools
Old 11th April 2008, 08:26 PM   #1
waam68 is offline waam68  United Kingdom
diyAudio Member
 
Join Date: Apr 2007
Default First Project Finished-Tubelab Simple SE

First Project Finished-Tubelab Simple SE
[/IMG]

First Project Finished-Tubelab Simple SE


OK not exactly breaking new ground here but thought I'd post the finished article! Had a few teething troubles with an input connector & a couple of joints but it's finally done after about 3 months of grabbing the odd hour here & there after work & on rainy weekends. I initially built it with the $20 edcor's which sounded very sweet but lacked bottom end on rock driving my 15ohm vintage wharfedales so I sprang for the bigger edcors, definately better with my big speakers. I had tinkered with a couple of old heathkits previously but this project was definately a big learning curve for me. The chassis is steel hammond which took some work but is very solid, I was glad I went for the biggest I could fit in my rack. Coupling caps are russian PIO off ebay & some of the higher wattage resistors are kiwame which were pricey as I had trouble finding high wattage resistors. I scored cheap bits off ebay wherever possible like the tubes, wiring etc. I am really pleased with the sound & especially the way it goes loud like all the way up without distortion. It's detailed but not clinical & has tons of bass. I'm driving it from my cheapish Yaoin MS12 tube pre/phono stage. I have an old Tandberg wooden reel to reel case that's the base for my next one...probably will have a go at the Tubelab SE
I would definately recommend the Tubelab as a first project, the manual is a big help!
Thanks to George for doing it! & for all the inspiration on here!
Mike
  Reply With Quote
Old 11th April 2008, 10:09 PM   #2
kvk is offline kvk  United States
diyAudio Member
 
Join Date: Jan 2008
What'd you use for the auxiliary cap?

I'm thinking of starting to gather parts for one. Not sure if to use a big electrolytic, a motor run, or a both polyfilm (cause it's faster) and a big electrolytic (cause it's big).

I was thinking of using the new GSXE Edcors.
  Reply With Quote
Old 12th April 2008, 06:23 AM   #3
waam68 is offline waam68  United Kingdom
diyAudio Member
 
Join Date: Apr 2007
It's a motor RUN oil cap I got off ebay in the US from the link posted by Chris on here in one of his posts on his simple SE build. I bought two for $12 each from memory (it was a few months ago). I think it was 80uf 500v. Couldn't get a clip big enough so I just made one up from scrap copper sheet.
  Reply to this post

Reply


First Project Finished-Tubelab Simple SEHide this!Advertise here!
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tubelab Simple P-P booangler Tubelab 764 8th April 2021 10:24 AM
Electrolyticless Tubelab Simple SE nic6paul Tubelab 26 20th August 2013 12:56 PM
Tubelab SE finished but need help. Evenharmonics Tubelab 50 8th July 2008 06:04 PM
Tubelab Simple SE & Edcor waam68 Tubelab 2 6th March 2008 12:15 PM
New SET: JE labs simple 45 or tubelab SE? cwujek Tubelab 14 27th November 2007 04:15 AM


New To Site? Need Help?

All times are GMT. The time now is 05:49 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright ©1999-2021 diyAudio
Wiki