Hopefully you have already figured it out, but in case you haven't, here is the clue you need.
Each side is made by two symmetrical halves. This means, each half of one side is the mirror image of the other.
Now that you have the clue, take a deep breath and rearrange the pieces. Once you do it, another question will pop in your mind and the answer is:
The holes should be on the top to make access to the PCB easier for measurements and adjustments.
Have fun!
Each side is made by two symmetrical halves. This means, each half of one side is the mirror image of the other.
Now that you have the clue, take a deep breath and rearrange the pieces. Once you do it, another question will pop in your mind and the answer is:
The holes should be on the top to make access to the PCB easier for measurements and adjustments.
Have fun!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.