• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Teflon Mains Cable for TNT TTS

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
B

Blue_Max

Member
Joined 2003
An externally hosted image should be here but it was not working when we last tested it.

Belden 83802
Number of Conductors: 2
AWG: 12. Stranding: 7x20, Conductor Material: TC (Tinned Copper)
300Volt, 25 Amp
Insulation Material: Teflon® (FEP - Fluorinated Ethylene Propylene)
Outer Shield Material: Aluminium Foil-Polyester Tape (Beldfoil®) and Tinned Copper braid
Outer Shield Coverage: 100%
Outer Jacket Material: Teflon® (Fluorinated Ethylene Propylene)
Overall Nominal Diameter: 0.303 inch (7.69mm)

An externally hosted image should be here but it was not working when we last tested it.

I have some of this cable surplus to my requirements. You can buy this from me at cost price plus post.
PM me with length required and I will let you know the total cost.

DIY instructions with photos and links is at Dave Whitter’s website
http://www.davewhitter.pwp.blueyonder.co.uk/tnt_tts_mains_cable_has_been_aro.htm

An externally hosted image should be here but it was not working when we last tested it.

TTS use Kimber style weaving similar to the Reference PowerKord by Russ Andrews; priced at £174 for 1.8 meters. TTS made with Belden 83802 you also get two levels of Teflon insulation, double foil screening and much thicker cores. So it is a worthwhile project.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom