• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS Amanero-Hermes-Cronus Combo 45.1584/49.152MHz Clocks+B3SE+Oled controller+2x5V ps

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hello,

I have for sale the following:
1. Amanero-Hermes-Cronus Combo - 45.1584/49.152MHz Clocks Sold
2. B3SE dac , CE Designs controller, Apple remote, Mercury IV Sold
The B3SE includes all voltage regulators, the 1.2V regulator is soldered under the dac board. The dac supports only i2s input at this moment because I have removed the input muxes that shift between i2s and spdif. I will provide together with the dac also the original mcu with tpa firmware for B3SE dac when used asynchronous and also a few blank mcus in case you want to use the dac synchronous and will to burn the appropriate firmware.
The CE Designs controller(uses an NewHaven 20x4 oled display) has the firmware modified to be used with a rotary encoder, firmware that is actually written on the mcu. Original firmware uses push buttons to move the volume or navigate through the menu. You can find more info about the dac controller and also the source code here GitHub - ce-designs/SabreCE: For controlling a Sabre DAC . Unfortunately his site doesn`t work no more for a few years by now, I can provide a schematic for the controller if needed.
With the dac controller is included also an Apple remote.
3. Dual 5V power supply and Schaffner FN9290-1-06 Dual stage filter Power Entry Module 140eu
More info about the dual 5V power supply you can find here FS dual lt3081 voltage regulator pcb & lt3081/lt3091 bipolar power supply pcb


A short video that demonstrates the functionality can be done if the buyer wishes.



Ps. I have a dual mono ultra low noise power supply that can be sold together with the Mercury IV, price 110eu

Thanks.
 

Attachments

  • IMG_7116.JPG
    IMG_7116.JPG
    115.7 KB · Views: 798
  • IMG_7129.JPG
    IMG_7129.JPG
    123.1 KB · Views: 231
  • IMG_7126.JPG
    IMG_7126.JPG
    94.2 KB · Views: 185
  • IMG_7119.JPG
    IMG_7119.JPG
    98.8 KB · Views: 242
  • IMG_7117.JPG
    IMG_7117.JPG
    103.8 KB · Views: 762
  • image1.jpeg
    image1.jpeg
    139.1 KB · Views: 769
  • IMG_7115.JPG
    IMG_7115.JPG
    97.1 KB · Views: 770
  • IMG_7114.JPG
    IMG_7114.JPG
    91 KB · Views: 791
  • es9018 jitter.jpg
    es9018 jitter.jpg
    77.4 KB · Views: 224
  • osf off es9018 2vrms without iv resistors and filter.jpg
    osf off es9018 2vrms without iv resistors and filter.jpg
    154.8 KB · Views: 139
Last edited:
Prices updated. I have included some photos with the power supply for the iv stage(the ps is adjustable and can go up to +/-24v ) and also a thd measurement for the dac with the mercury iv
 

Attachments

  • image1.jpeg
    image1.jpeg
    109 KB · Views: 90
  • image2.jpeg
    image2.jpeg
    126.2 KB · Views: 100
  • iv output.jpg
    iv output.jpg
    134.7 KB · Views: 126
  • image3.jpeg
    image3.jpeg
    131.7 KB · Views: 133
  • image0.jpeg
    image0.jpeg
    132.6 KB · Views: 98
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.