SOLD - Buffalo-IIIsePro ES9038
Buffalo IIIsePro DAC is fully assembled and working with a Raspberry Pi, it’s set up as an i2c DAC with a switchable SPDIF x 4 input so is ready to become part of a system with little to no extra work.
Buffalo-IIIsePro ES9038 2-Channel DAC w/Full Series Regulator Set
(1) Buffalo-IIIsePro32 (ES9038) 2-Channel DAC Module (Assembled and Tested)
(1) AVCC-SR Dual 3.6V Series Regulator Module (Assembled and Tested)
(2) TridentSR 3.3V Series Regulator Module (Assembled and Tested)
(1) TridentSR 1.3V Series Regulator Module (Assembled and Tested)
 Mercury v1.1 Kit plus  Placid HD BP Power Supply Kit
 LCDPS assembled and working fine
 4:1 Mux/Demux Digital Switch Kit
 4-Position Selector Switch Kit that Connects to the 4:1 Mux/Demux with included cable/connector
 Raspberry Pi Model 3
 Touch Screen with a little scratch (see photo). Sorry.
IEC Power and boot
Wood and feet
Single Ended RCA and Balanced XLR Connectors
I am asking for £xxx.
I hope this time everything working.
Last edited by szczemirek; 24th October 2019 at 08:09 PM.