• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Complete Active System with Hypex DSP/Amps

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I just don't have time to work on this anymore. You get a TON of hardware for the price. Asking $1500 for pickup in Southern California. With all the drivers, amplifers, and raw materials, there's about $4000.00 invested, not including about 50 hours of machine time.


2 - Scan Speak D2608/913000 Tweeters (Peerless HDS)
2 - Scan Speak 18W/8545-00
4 - SB Acoustics SB23MFCL45-8 Subwoofer Drivers
2- Hypex NC252MP N-Core 250W X 2 Amplifiers
2- Hypex NC500MP N-Core 500W X 1 Amplifiers
3 - Hypex DLCP DSP preamp/DAC with power supplies
1 - Enclosure build for one of the DLCPs
4- Hypex Soft Start Modules
1 - Hypex Remote
1 - Hypex I/O board with display for DLCP
Tons of custom machined and andodized aluminum parts.
2 complete CNC cut MDF enclosures.
Assorted fasteners, and connectors.
2 - Extra lower plates for use with external DSP


Condition is pretty good. The teal colored fabric will have to be replaced with black, as the rubber mid range seems to have stained the fabric when it touches.


Please note that I'm only looking for local pickup. If you want me to pack and ship parts, you have to buy the whole thing, and I will trash the rest.
 

Attachments

  • 20180201_180124.jpg
    20180201_180124.jpg
    486.5 KB · Views: 605
  • 20181021_111138.jpg
    20181021_111138.jpg
    379.5 KB · Views: 594
  • 20181127_182311.jpg
    20181127_182311.jpg
    270.1 KB · Views: 589
  • 20181201_135354.jpg
    20181201_135354.jpg
    460.9 KB · Views: 588
  • 20190527_092208.jpg
    20190527_092208.jpg
    774.8 KB · Views: 588
  • 20190527_092216.jpg
    20190527_092216.jpg
    793.4 KB · Views: 279
Last edited:
I just don't have time to work on this anymore. You get a TON of hardware for the price. Asking $1500 for pickup in Southern California. With all the drivers, amplifers, and raw materials, there's about $4000.00 invested, not including about 50 hours of machine time.


2 - Scan Speak D2608/913000 Tweeters (Peerless HDS)
2 - Scan Speak 18W/8545-00
4 - SB Acoustics SB23MFCL45-8 Subwoofer Drivers
2- Hypex NC252MP N-Core 250W X 2 Amplifiers
2- Hypex NC500MP N-Core 500W X 1 Amplifiers
3 - Hypex DLCP DSP preamp/DAC with power supplies
1 - Enclosure build for one of the DLCPs
4- Hypex Soft Start Modules
1 - Hypex Remote
1 - Hypex I/O board with display for DLCP
Tons of custom machined and andodized aluminum parts.
2 complete CNC cut MDF enclosures.
Assorted fasteners, and connectors.
2 - Extra lower plates for use with external DSP


Condition is pretty good. The teal colored fabrick will have to be replaced with black, as the rubber mid range seems to have stained the fabric when it touches.

can i buy hypex group only ? such as amp ,dlcp DSD , softstart ,remote.
NC500MP is one chanel ? support to be 2set for 2chanel right ?
 
Last edited:
Hello all,

I won't part out and sell at a lower price. I would much prefer to sell locally and deliver whole. If you only want a few parts, please understand that you are buying the whole thing, and whatever I don't ship gets recycled. If I have to dissemble and pack, that just takes more time I don't have.

Thanks for understanding.
 
can i buy hypex group only ? such as amp ,dlcp DSD , softstart ,remote.
NC500MP is one chanel ? support to be 2set for 2chanel right ?
Please note that I'm only looking for local pickup. If you want me to pack and ship parts, you have to buy the whole thing, and I will trash the rest.
It is considered courteous to read the ad and act appropriately.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.