Thought the normal DIL spacing was supposed to be 2.54mm between legs???
Last edited:
I got this sockets from a friend many , many years ago . TO-99 PTFE , the same like here :
Precision Machined TO-99 Socket, PTFE Base, Gold Plated, TO99 | eBay
Very rare in these days and not cheap .
Kind regards , Alexander .
Precision Machined TO-99 Socket, PTFE Base, Gold Plated, TO99 | eBay
Very rare in these days and not cheap .
Kind regards , Alexander .
Last edited:
Will remeasure, but I am talking about the spacing between pins 1 and 8 which as I understand is supposed to be the same? Either way my sockets don't fit, too wide [emoji16]Jazid.... I think you´ve measured something wrong here.
Had to go get mine and measure them.
Between pin 1 & 4 on each socket is exactly 7.62 mm (3 x 2.54).
I bet, yours can´t be different from mine
And for the future, guys.....
Use this thread to give feedback, when you receive your PCB´s.
Use the original Mini-Me thread to share your building experiences. That way all the building info is easier to find, if just in one thread
https://www.diyaudio.com/forums/analogue-source/242855-mini-phono-preamp-9.html#post5801117
Use this thread to give feedback, when you receive your PCB´s.
Use the original Mini-Me thread to share your building experiences. That way all the building info is easier to find, if just in one thread
https://www.diyaudio.com/forums/analogue-source/242855-mini-phono-preamp-9.html#post5801117
Although most of you confirmed receiving your goods, we still miss feedback from a couple of you guys
I´m specially interrested in those of you from the US and Thailand, if you got your stuff (how fast the postal service really is), and just for my personal experience if maybe future GB´s, if there ware any delays or hazzle getting your packages.
Please update, when you receive them
Thanks in advance.
I´m specially interrested in those of you from the US and Thailand, if you got your stuff (how fast the postal service really is), and just for my personal experience if maybe future GB´s, if there ware any delays or hazzle getting your packages.
Please update, when you receive them
Thanks in advance.
Hi Alex,
I found these sockets in my box. It`a pity that the pins are so short.
It`s a pity too, that all PCBs are gone
!
Jacky
I found these sockets in my box. It`a pity that the pins are so short.
It`s a pity too, that all PCBs are gone
!An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Jacky
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.